The use of the Record/playback controls are designed to be used exclusively to play back recorded over the air; not to listen to, which is why MOX must be asserted before it will work.
Playing post-processed audio into the radio expecting I/Q data will have all sorts of unintended results. If you want to record off the air signals just to listen to, the use the WAVE form and record, by pressing the record button, (Receive) pre-processed audio. You play it back by selecting it file you just recorded by adding it to the playlist and clicking on the PLAY button. Use the loop option to continuously loop the recording. -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bill K7UOP Sent: Friday, February 25, 2011 7:27 PM To: 'pierce day' Cc: [email protected] Subject: Re: [FlexEdge] Wave Play problem PSDR v2.0.19 RC1 Thanks for the reply Pierce. I was recording another stations audio as a test and then tried to play it back. I didn't want to transmit so I did not turn the MOX button on. I just wanted to listen to it locally. The problem is... that after I play any post-processed audio, it creates havoc with the Panadapter display. Afterwards the display is centered 9 KHz below my tuned freq and all received signals are mirrored symmetrically on both sides of center. I take it you are not having any problem with your setup using v2.0.19 RC1 and it works ok as you describe(?). I am wondering, is anyone else having this problem with the new beta release of PSDR???? I captured jpegs but I don't know if this reflector allows attachments. I'll hold them unless someone asks to see them. 73, Bill - K7UOP -----Original Message----- From: pierce day [mailto:[email protected]] Sent: Friday, February 25, 2011 3:45 PM To: Bill K7UOP Subject: Re: [FlexEdge] Wave Play problem PSDR v2.0.19 RC1 Bill: If you just want a quick record/play, click the MOX, click the white RECORD button, then speak. To playback, click MOX, then click the PLAYBACK arrow. If you don't want it to go over the air, turn drive to zero. Pierce W4ZDI ----- Original Message ----- From: "Bill K7UOP" <[email protected]> To: <[email protected]> Sent: Friday, February 25, 2011 2:06 PM Subject: [FlexEdge] Wave Play problem PSDR v2.0.19 RC1 >I tried recording and then playing back a wav file using the Wave File > Controls form, and also from the main console buttons in the upper left > corner. > > When I select Play of a post processed audio recording, it plays in the > center (actually + and - of center) of the Panadapter display. And then > all > on the air signals are reflected symmetrically on both sides of center. If > I > then change Sample Rate in the PowerSDR Setup form Audio, Primary tab the > Panadapter goes back to normal. I can play back the post processed wave > file > in another program and it is good audio. > > Playing back a pre-processed I/Q works Ok without the problem. > > I've done a fair amount of playing with I/Q recordings but not > post-processed audio files. So don't know what to really expect. > > Anyone else have this problem or is it just my setup? > > 73, Bill - K7UOP > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is > used for posting topics related to SDR software development and > experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
