I was downloading new updates to the Skins, So to turn off the radio (Since
I have a 5000C) I always pull the FireWire Cable. Then when I pluged it
back in I did not pay proper attention and felt a hole on the back and stuck
in the FireWire Cable..... I missed, it was a RJ45 Network cable hole....
I got the same results as you indicated.... After putting it in the right
socket all was Flexie again.
Ken W9YNI
----- Original Message -----
From: "William H. Fite" <[email protected]>
To: "Drax Felton" <[email protected]>
Cc: "Flexedge" <[email protected]>
Sent: Saturday, February 26, 2011 4:45 PM
Subject: Re: [FlexEdge] Help: Locked out of radio
It isn't flakey at all, Drax. You just have a bad firewire cable or one
that isn't fully connected. Fix that and don't blame the software.
On Fri, Feb 25, 2011 at 10:48 PM, Drax Felton <[email protected]>
wrote:
This new version .19 is too flakey for me. .16 worked fine.
The Flex 5000 keeps disappearing from the "Available Radio Interfaces"
list.
I've reinstalled everything several times. Sometimes I can start
PowerSDR
and other times nothing.
-----Original Message-----
From: Tim Ellison [mailto:[email protected]]
Sent: Thursday, February 24, 2011 8:05 PM
To: Drax Felton; 'Flexedge'
Subject: RE: [FlexEdge] Help: Locked out of radio
Also make sure the radio is communicating with the PC by checking the
status
in the FLEX Firewire Control panel.
-Tim
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used
for posting topics related to SDR software development and
experimentalist
who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is
used for posting topics related to SDR software development and
experimentalist who are using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
