At 4/10/02, you wrote:
>Apparently something has changed w/ the z-placement of the model on the 
>runway.  With the recent CVS, my models are now sitting below the runway 
>and I can only see (sometimes) the tops of the airplanes.  In my 
>*-model.xml files, this was working:
>
>  <offsets>
>   <z-m>-.2</z-m>
>   <x-m>-.6</x-m>
>   <pitch-deg>0</pitch-deg>
>  </offsets>
>
>Now to get the models up off the runway, I need a large <z-m> value, say 
>2.  While this moves the model up, the model still rotates about the 
>original point that is below the runway.  This point that the model 
>rotates about is the target spot on the hud ladder.
>
>Anybody know where I should be looking to move the airplane up?  Some new 
>property?
>
>(John Check asked the same question back on 3/8/02 and I reply w/ an 
>answer ... which does not now work.)
>

I can ask this differently.  What sets the height above the runway of the 
hud-ladder target spot (wrt the 3D model view) --- ie the center spot?  For 
c310-yasim and c172-larcsim, it's above the runway.  For UIUC models, it's 
below the runway (a recent change).

Thanks!



>**************************************************
>  Prof. Michael S. Selig
>  Dept. of Aero/Astro Engineering
>  University of Illinois at Urbana-Champaign
>  306 Talbot Laboratory
>  104 South Wright Street
>  Urbana, IL 61801-2935
>  (217) 244-5757 (o), (509) 691-1373 (fax)
>  mailto:[EMAIL PROTECTED]
>  http://www.uiuc.edu/ph/www/m-selig
>  http://www.uiuc.edu/ph/www/m-selig/faq.html (FAQ)
>**************************************************
>
>
>_______________________________________________
>Flightgear-devel mailing list
>[EMAIL PROTECTED]
>http://mail.flightgear.org/mailman/listinfo/flightgear-devel



**************************************************
  Prof. Michael S. Selig
  Dept. of Aero/Astro Engineering
  University of Illinois at Urbana-Champaign
  306 Talbot Laboratory
  104 South Wright Street
  Urbana, IL 61801-2935
  (217) 244-5757 (o), (509) 691-1373 (fax)
  mailto:[EMAIL PROTECTED]
  http://www.uiuc.edu/ph/www/m-selig
  http://www.uiuc.edu/ph/www/m-selig/faq.html (FAQ)
**************************************************


_______________________________________________
Flightgear-devel mailing list
[EMAIL PROTECTED]
http://mail.flightgear.org/mailman/listinfo/flightgear-devel

Reply via email to