Mathias Fröhlich a écrit : >> I tested this few more times, in a place with severals carriers >> (eisenhower, foch, clemenceau...) and if i start FG far from this place, >> then move with the location menu to the closest airport, carriers are >> not solid (all the carriers). >> If i start near the carriers, then move far away, and then come back, >> carriers are solid. >> I remember a long flight from KLSV to the carrier near KHAF, and the >> carrier was not solid . >> >> To me it depend if the 3D model is loaded in startup. >> > > Can you please retest? > > I have found a problem with model loading and setting of the traversal masks > that should now be fixed. > > i tested, starting FG in KLSV, going to KHAF with location menu, and after 50 nm cruise to the Carl Vinson, and, he is solid now, but the arresting wires don't work in this case.
second try, starting on the carrier deck, all is fine. using the location menu has same effects on other carriers near LFTH (got foch, clemenceau and eisenhower here), none of them have a working wire if i come near with location menu from far, but now they are solid btw with little front wind, little fuel, the f14 don't need the wires to stop on the carrier :). jano ------------------------------------------------------------------------------ This SF.net email is sponsored by: High Quality Requirements in a Collaborative Environment. Download a free trial of Rational Requirements Composer Now! http://p.sf.net/sfu/www-ibm-com _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
