On 23/09/2005 at 08:53 Minot Opdyke wrote:
>Thanks, I'll try it. I did successfully enable ATC for my cessan as >suggested going from KSFO to KSQL. However.... The AI comm text and the >ATC comm text display in the exact same spot on the screen. One >superimposed on the other, making for garbled text. Should I not have >both enabled at the same time? > In real life you get a screech if two radios transmit on the frequency at the same time - this is the virtual equivalent :-) You should make sure that you call ATC after any on-screen transmissions have finished (disappeared). The AI and ATC *should* try to transmit when the frequency is clear. There are bugs in the AI/ATC logic though that mean they will sometimes transmit over you - in particular I think that go-around instructions are issued without waiting for the channel to clear. The AI is currently somewhat unmanageble at level 3 - try knocking it down to 2 for a reasonable amout of traffic, or 1 for fairly sparse traffic. Cheers - Dave This message has been checked for viruses but the contents of an attachment may still contain software viruses, which could damage your computer system: you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. _______________________________________________ Flightgear-users mailing list [email protected] http://mail.flightgear.org/mailman/listinfo/flightgear-users 2f585eeea02e2c79d7b1d8c4963bae2d
