Le samedi 26 novembre 2005 à 06:49 +0100, Arnt Karlsen a écrit :
> On Sat, 26 Nov 2005 03:40:10 +0100, Gerard wrote in message 
> <[EMAIL PROTECTED]>:
> >  
> > In addition
> > I should have 256k Video Mem
> 
> ..you mean 256M.  And, word is 128M cards will perform better unless you
> go for the very top end 256M cards, less in-card overhead or somesuch.

Sure , M and not k, you understood what i wanted to say (it was 3 am
when i wrote that mail) 
 
> ..seriously, this wee log snippet tells you what you need and not.
> (II) RADEON(0): CP in BM mode
> (II) RADEON(0): Using 8 MB GART aperture
> (II) RADEON(0): Using 1 MB for the ring buffer
> (II) RADEON(0): Using 2 MB for vertex/indirect buffers
> (II) RADEON(0): Using 5 MB for GART textures
> (II) RADEON(0): Memory manager initialized to (0,0) (2048,8191)
> (II) RADEON(0): Reserved area from (0,1536) to (2048,1538)
> (II) RADEON(0): Largest offscreen area available: 2048 x 6653
> (II) RADEON(0): Will use back buffer at offset 0x2400000
> (II) RADEON(0): Will use depth buffer at offset 0x3000000
> (II) RADEON(0): Will use 69632 kb for textures at offset 0x3c00000
> (II) RADEON(0): Render acceleration enabled
> (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
> 

You are right, i did not say that very often 
mainly during AC Model devel i have in //
 Gimp, Blender,   AC and FG running.
I think the internal Graphics memory is out with only 128 "M"  

> ..if you run 1600x1200x24bpp, you get 85MB's for textures.
> 
> ..ok, 2048x1536x24bpp is heavy for a K6-2 450MHz box.  ;o)
> [EMAIL PROTECTED]:/usr/local/src/brlcad-7.6.4 $ glxgears
> 184 frames in 5.0 seconds = 36.800 FPS
> 184 frames in 5.0 seconds = 36.800 FPS
> 184 frames in 5.0 seconds = 36.800 FPS
> 184 frames in 5.0 seconds = 36.800 FPS
> 184 frames in 5.0 seconds = 36.800 FPS
> [EMAIL PROTECTED]:/usr/local/src/brlcad-7.6.4 $               

You are right with glxgears the graphic card fly (more than 3500 fps), 
glxgears is not a good test   not representative of the performances
> 
> > That card is AGPX8
> > That card needs more electric power, you must buy a minimum of 500
> > watts supply.
> 
> ..and 1x for this old box, my other agp box is a PII 300.  ;o)
> 
Cheers
-- 
Gerard


_______________________________________________
Flightgear-users mailing list
Flightgear-users@flightgear.org
http://mail.flightgear.org/mailman/listinfo/flightgear-users
2f585eeea02e2c79d7b1d8c4963bae2d

Reply via email to