I flew this around a little bit and it seems quite nice. My first
impression was that it was sluggish for a jet fighter, but then I
learned that it was built before the end of WWII and was the USAF's
first, so I'm not surprised.

One strange thing I did see a couple of times when taxiing was the
plane bouncing the nose up in the air and flipping suddenly. It always
occurred while turning using differential braking. Actually, I think
the bounce happened when I let go of the brake. It basically looks
like the  nose gear acts as a released spring and propels the nose
upwards. Otherwise everything seems goood.

The gunsight is cool. Makes me wish I could get into a dogfight with it.

Good job!

-Jeff

On 12/19/05, Dave Culp <[EMAIL PROTECTED]> wrote:
> I've just completed a Lockheed F-80C Shooting Star.  I'd like someone to
> please download it and take it up for a spin before I submit it to the
> hangar.
>
>       http://home.comcast.net/~davidculp2/F80C.tar.gz
>
>       screenshot:
>       http://home.comcast.net/~davidculp2/P80C-001.jpg
>
> The exterior model was originally done by Massimo Taccoli, who has done
> several very nice models for MSFS, and has given me permission to convert it
> for use in FlightGear and release the resulting model under GPL.  The FDM is
> JSBSim, based on Aero-Matic output with a couple tweaks.  It runs here in CVS
> FlightGear, and should run in 0.9.8 and later?
>
> It's a no-brainer to fly.  Engine is running at startup, and flaps are set at
> half (takeoff position).  Check out the gunsight (you have to turn it on by
> clicking on the on/off switch).  It has auto-depression for g-load.
>
> Thanks,
>
> Dave
>
> _______________________________________________
> Flightgear-users mailing list
> Flightgear-users@flightgear.org
> http://mail.flightgear.org/mailman/listinfo/flightgear-users
> 2f585eeea02e2c79d7b1d8c4963bae2d
>

_______________________________________________
Flightgear-users mailing list
Flightgear-users@flightgear.org
http://mail.flightgear.org/mailman/listinfo/flightgear-users
2f585eeea02e2c79d7b1d8c4963bae2d

Reply via email to