Georg Vollnhals wrote:
>>>
>> It's best to use CVS versions wherever possible, CVS freeglut works just
>> fine. I've built RPM's for x86 and will have to check to see if they are
>> still around as I changed hard drives a while back and they may be on
>> the old one.
>> Earlier today I built and installed everything on an Athlon 64x2 box
>> with openSuSE 10.1 x86_64, the full set of RPM's generated with
>> "checkinstall" and working. freealut-1.1.0.tar.gz and
>> openal-0.0.8.tar.gz had to be used, though to build openal, it needed
>> openal.xpm one directory up, so I had to copy it over from an earlier
>> download - openal is looking a bit untidy with regards to Linux, they
>> seem to be concentrating more heavily on Windows and OSX, may be SDL is
>> the way to go. I am using plib that I built from CVS on 13th. August.
>> The build instructions for FlightGear are quite straightforward, but it
>> needs careful attention especially with regards to freealut, freeglut
>> and openal, SimGear and FlightGear pose no problems.
>> Regards
>> Sid.
>> --
>> Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
>> Retired IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
>> Specialist, Cricket Coach
>> Microsoft Windows Free Zone - Linux used for all Computing Tasks
>>
>>
>
> Hi Sid!
>
> 1. I am a totally Linux n00b
> 2. After installing and updating a OpenSuse 10.1 x86_64 0/S all is
> running fine (FlightGear precompiled package, other addon-stuff)
> 3. I followed your instruction but was stopped soon after starting to
> compile
> There was NO gcc compiler (only a precompiler) installed in OpenSuse
> 10.1 _64 and no (online/YAST) update possibility. At last I found a gcc
> x86_64
> rpm by searching a rpm-search-internet-site.
> 4. But there are obviously some things missing, or I have to configure
> something I don't have the knowledge as a Linux starter:
> When running ./configure g++, c++, gpp etc are not found!
> I am adding the first part of the configure-output at the bottom of this
> message. I also run "./autogen.sh" before "./configure" and it had some
> strange output (other than I am used from Cygwin). And I show the
> contents of the installed gcc files at the message bottom.
> 5. Can you give me a hint?/ a help?. I searched a lot with Google and
> rpm-find and .. but could not get any result which I found helpful for
> my problem.
>
> Thank you very much in advance, I really want get this running as I
> decided to nearly fully change from WinXP to OpenSuse. Actually I am
> doing 95 % of my daily work with the new Linux build.
>
> Regards
> Georg EDDW
>
> Here are the facts:
>
> _*1. What I have actually installed:
>
> [EMAIL PROTECTED]:/usr/lib64/gcc> ls -lhR
> .:
> insgesamt 0
> drwxr-xr-x 3 root root 72 2006-04-29 00:20 x86_64-suse-linux
>
> ./x86_64-suse-linux:
> insgesamt 0
> drwxr-xr-x 4 root root 448 2006-09-25 01:33 4.1.0
>
> ./x86_64-suse-linux/4.1.0:
> insgesamt 5,7M
> drwxr-xr-x 2 root root 320 2006-09-25 01:33 32
> -rwxr-xr-x 1 root root 5,3M 2006-04-29 00:22 cc1
> -rwxr-xr-x 1 root root 106K 2006-04-29 00:22 collect2
> -rw-r--r-- 1 root root 2,4K 2006-04-29 00:20 crtbegin.o
> -rw-r--r-- 1 root root 2,9K 2006-04-29 00:20 crtbeginS.o
> -rw-r--r-- 1 root root 2,9K 2006-04-29 00:20 crtbeginT.o
> -rw-r--r-- 1 root root 1,9K 2006-04-29 00:20 crtend.o
> -rw-r--r-- 1 root root 1,9K 2006-04-29 00:20 crtendS.o
> -rw-r--r-- 1 root root 3,2K 2006-04-29 00:20 crtfastmath.o
> drwxr-xr-x 2 root root 504 2006-09-25 01:33 include
> -rw-r--r-- 1 root root 112K 2006-04-29 00:20 libgcc.a
> -rw-r--r-- 1 root root 43K 2006-04-29 00:20 libgcc_eh.a
> -rw-r--r-- 1 root root 35K 2006-04-29 00:20 libgcov.a
> -rw-r--r-- 1 root root 87K 2006-04-29 00:20 SYSCALLS.c.X
>
> ./x86_64-suse-linux/4.1.0/32:
> insgesamt 160K
> -rw-r--r-- 1 root root 1,6K 2006-04-29 00:20 crtbegin.o
> -rw-r--r-- 1 root root 2,2K 2006-04-29 00:20 crtbeginS.o
> -rw-r--r-- 1 root root 1,9K 2006-04-29 00:20 crtbeginT.o
> -rw-r--r-- 1 root root 1,3K 2006-04-29 00:20 crtend.o
> -rw-r--r-- 1 root root 1,6K 2006-04-29 00:20 crtendS.o
> -rw-r--r-- 1 root root 3,6K 2006-04-29 00:20 crtfastmath.o
> -rw-r--r-- 1 root root 76K 2006-04-29 00:20 libgcc.a
> -rw-r--r-- 1 root root 32K 2006-04-29 00:20 libgcc_eh.a
> -rw-r--r-- 1 root root 25K 2006-04-29 00:20 libgcov.a
>
> ./x86_64-suse-linux/4.1.0/include:
> insgesamt 192K
> -rw-r--r-- 1 root root 41K 2006-04-28 23:19 emmintrin.h
> -rw-r--r-- 1 root root 5,3K 2006-04-28 23:19 float.h
> -rw-r--r-- 1 root root 1,4K 2006-04-28 23:19 iso646.h
> -rw-r--r-- 1 root root 3,4K 2006-04-28 23:19 limits.h
> -rw-r--r-- 1 root root 4,9K 2006-04-28 23:19 mm3dnow.h
> -rw-r--r-- 1 root root 26K 2006-04-28 23:19 mmintrin.h
> -rw-r--r-- 1 root root 1,9K 2006-04-28 23:19 mm_malloc.h
> -rw-r--r-- 1 root root 3,8K 2006-04-28 23:19 pmmintrin.h
> -rw-r--r-- 1 root root 750 2006-04-28 23:19 README
> -rw-r--r-- 1 root root 4,3K 2006-04-28 23:19 stdarg.h
> -rw-r--r-- 1 root root 1,6K 2006-04-28 23:19 stdbool.h
> -rw-r--r-- 1 root root 13K 2006-04-28 23:19 stddef.h
> -rw-r--r-- 1 root root 330 2006-04-28 23:19 syslimits.h
> -rw-r--r-- 1 root root 8,9K 2006-04-28 23:19 unwind.h
> -rw-r--r-- 1 root root 139 2006-04-28 23:19 varargs.h
> -rw-r--r-- 1 root root 36K 2006-04-28 23:19 xmmintrin.h
>
> [EMAIL PROTECTED]:/usr/lib/gcc> ls -lhR
> .:
> insgesamt 0
> drwxr-xr-x 3 root root 72 2006-08-28 23:19 i586-suse-linux
>
> ./i586-suse-linux:
> insgesamt 0
> drwxr-xr-x 2 root root 192 2006-08-28 23:19 2.95.3
>
> ./i586-suse-linux/2.95.3:
> insgesamt 140K
> -rw-r--r-- 1 root root 1,9K 2006-04-23 03:44 crtbegin.o
> -rw-r--r-- 1 root root 2,2K 2006-04-23 03:44 crtbeginS.o
> -rw-r--r-- 1 root root 1,3K 2006-04-23 03:44 crtend.o
> -rw-r--r-- 1 root root 1,4K 2006-04-23 03:44 crtendS.o
> -rw-r--r-- 1 root root 121K 2006-04-23 03:44 libgcc.a
>
> [EMAIL PROTECTED]:/usr/bin> ls -lh gcc
> -rwxr-xr-x 1 root root 132K 2006-04-29 00:22 gcc
>
> _*2. The ./autogen.sh output
>
> *_dhcppc2:/usr/local/src/tar/plib-1.8.4 # ./autogen.sh
> Running aclocal
> ./autogen.sh: line 11: aclocal: command not found
> Running automake
> ./autogen.sh: line 13: automake: command not found
> Running autoconf
> ./autogen.sh: line 15: autoconf: command not found
> ======================================
> Now you are ready to run './configure'
> ======================================
>
> _*3. The ./configure .. output*_
>
> dhcppc2:/usr/local/src/tar/plib-1.8.4 # ./configure
> --prefix=/usr/local/FlightGe
> ar
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> includedir changed to ${prefix}/include/plib libdir is ${exec_prefix}/lib
> checking for gcc... gcc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ANSI C... none needed
> checking for style of include used by make... GNU
> checking dependency style of gcc... gcc3
> checking how to run the C preprocessor... gcc -E
> *checking for g++... no
> checking for c++... no
> checking for gpp... no
> checking for aCC... no
> checking for CC... no
> checking for cxx... no
> checking for cc++... no
> checking for cl... no
> checking for FCC... no
> checking for KCC... no
> checking for RCC... no
> checking for xlC_r... no
> checking for xlC... no
> checking whether we are using the GNU C++ compiler... no
> checking whether g++ accepts -g... no
> checking dependency style of g++... none*
> checking how to run the C++ preprocessor... /lib/cpp
>
>
You can use YaST
Software Management --> Package Groups --> Development
installing gcc, gcc-c++, glibc should be all that's necessary.
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Retired IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Flightgear-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/flightgear-users
