Philippe,
When you move the stick to the left, the left aileron should go up and the
right one should go down, and the opposite will happen if you move the stick
to the right. That is how an airplane turns. Or am I misunderstanding you?
--Chris
On 2/6/08, LeeE <[EMAIL PROTECTED]> wrote:
>
> What happens when you move the joystick from side to side - moving
> it from left to right instead of backwards and forwards?
>
> If the elevator moves up and down then I think you have to swap the
> 0 & 1 axes round so that axis 0 drives the aileron and axis 1
> drives the elevator.
>
> HTH
>
> LeeE
>
>
> On Tuesday 05 February 2008 17:53, Philippe Merlin wrote:
> > Hello,
> > I think my recent mail was not very clear, so i give more
> > information. The plane tested is the C172p but i tested with the
> > C310 its exactly the same problem.
> > The joystick works fine in flightgear for 2 axes (0 and 2) and
> > for the 8 buttons . For the axis 1 defined for the aileron, if i
> > put the joystick forward the value of the axis in js_demo is
> > "-1" : the aileron Right is up about +20 degrees The aileron Left
> > is down - 20 degrees.The Joystick is put downward js_demo give
> > "+1" for value and the aileron right is down -20 degrees the left
> > up + 20 degrees.
> > If i look at the FG Properties i Have :
> > /input/joystiks/axis(1)
> > FG properties
> > binding/
> > desc[0]='Aileron'(unspecified).
> > Another information before i was playing with an Joystick
> > Microsoft Sidewinder Pro and i have no problem, but i changed my
> > CPU from Athlon XP 1800 to Amd Athlon 64 X2 5200+.
> > My new mothercard has no joystick entry so i buy this microsoft
> > sidewinder USB.
> > Thanks for your Help.
> > Philippe Merlin
> >
> > Le lundi 4 février 2008, Philippe Merlin a écrit :
> > > Hello,
> > > i am on linux Debian lenny, the version of flightgear is the
> > > 0.910. Recently i buy an sidewinder 8 button usb joystick and
> > > it was recognized by Kde and js_demo and seemed worked fine
> > > I defined for the 3 Axes .
> > > Axes 0 Elevator
> > > Axes 1 Aileron
> > > Axes 3 Throttle
> > > The js0.xml joined at this mail is produced by fgjs.
> > > I look with the button 1 'view-cycle" and I watch when i test
> > > the Axes 1 the ailerons are not going in the same way, the
> > > right up the left down. Why ? Because this mistake i am
> > > blocked.
> > > I want help.
> > > Thank you.
> > > Philippe Merlin
> >
> > -----------------------------------------------------------------
> >-------- This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > Flightgear-users mailing list
> > Flightgear-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/flightgear-users
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Flightgear-users mailing list
> Flightgear-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/flightgear-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Flightgear-users mailing list
Flightgear-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flightgear-users
