Thank you for your answer, I do what you say axe 0 aileron and axe 1 elevator, same problem aileron right +20 degrees aileron left -20 degrees. Any other suggestion. Reinstall flightgear ? or install flightgear 1.0 from debian Sid (actually Debian Lenny) Philippe Merlin
Le mercredi 6 février 2008, LeeE a écrit : > What happens when you move the joystick from side to side - moving > it from left to right instead of backwards and forwards? > > If the elevator moves up and down then I think you have to swap the > 0 & 1 axes round so that axis 0 drives the aileron and axis 1 > drives the elevator. > > HTH > > LeeE > > On Tuesday 05 February 2008 17:53, Philippe Merlin wrote: > > Hello, > > I think my recent mail was not very clear, so i give more > > information. The plane tested is the C172p but i tested with the > > C310 its exactly the same problem. > > The joystick works fine in flightgear for 2 axes (0 and 2) and > > for the 8 buttons . For the axis 1 defined for the aileron, if i > > put the joystick forward the value of the axis in js_demo is > > "-1" : the aileron Right is up about +20 degrees The aileron Left > > is down - 20 degrees.The Joystick is put downward js_demo give > > "+1" for value and the aileron right is down -20 degrees the left > > up + 20 degrees. > > If i look at the FG Properties i Have : > > /input/joystiks/axis(1) > > FG properties > > binding/ > > desc[0]='Aileron'(unspecified). > > Another information before i was playing with an Joystick > > Microsoft Sidewinder Pro and i have no problem, but i changed my > > CPU from Athlon XP 1800 to Amd Athlon 64 X2 5200+. > > My new mothercard has no joystick entry so i buy this microsoft > > sidewinder USB. > > Thanks for your Help. > > Philippe Merlin > > > > Le lundi 4 février 2008, Philippe Merlin a écrit : > > > Hello, > > > i am on linux Debian lenny, the version of flightgear is the > > > 0.910. Recently i buy an sidewinder 8 button usb joystick and > > > it was recognized by Kde and js_demo and seemed worked fine > > > I defined for the 3 Axes . > > > Axes 0 Elevator > > > Axes 1 Aileron > > > Axes 3 Throttle > > > The js0.xml joined at this mail is produced by fgjs. > > > I look with the button 1 'view-cycle" and I watch when i test > > > the Axes 1 the ailerons are not going in the same way, the > > > right up the left down. Why ? Because this mistake i am > > > blocked. > > > I want help. > > > Thank you. > > > Philippe Merlin > > > > ----------------------------------------------------------------- > >-------- This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > _______________________________________________ > > Flightgear-users mailing list > > Flightgear-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/flightgear-users > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Flightgear-users mailing list > Flightgear-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Flightgear-users mailing list Flightgear-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-users
