Hello LeeE, Thanks you , It's right ,it's was an false problem and now all work fine. I make my first flight with this new joystick. Sorry for the noise. Philippe Merlin
Le mercredi 6 février 2008, LeeE a écrit : > Hello Philippe, > > First of all, and just as Chris Hodge says, the left and right > ailerons should move in opposite directions. This is correct. > > If you move your joystick backwards and forwards (towards you and > away from you) the elevator on both sides of the tail plane should > go up and down. > > As Chris said, If you move your joystick to the left, the left > aileron should go up and the right one should go down, and the > opposite should happen if you move the joystick to the right. > > Is this what happens? > > If it is then everything is correct. > > If this does not happen, tell us exactly what does happen when you > move the joystick backwards and forwards and also what happens when > you move the joystick from side to side. > > LeeE > > On Wednesday 06 February 2008 20:09, Philippe Merlin wrote: > > Thank you for your answer, I do what you say axe 0 aileron and > > axe 1 elevator, same problem aileron right +20 degrees aileron > > left -20 degrees. Any other suggestion. > > Reinstall flightgear ? or install flightgear 1.0 from debian Sid > > (actually Debian Lenny) > > Philippe Merlin > > > > Le mercredi 6 février 2008, LeeE a écrit : > > > What happens when you move the joystick from side to side - > > > moving it from left to right instead of backwards and forwards? > > > > > > If the elevator moves up and down then I think you have to swap > > > the 0 & 1 axes round so that axis 0 drives the aileron and axis > > > 1 drives the elevator. > > > > > > HTH > > > > > > LeeE > > > > > > On Tuesday 05 February 2008 17:53, Philippe Merlin wrote: > > > > Hello, > > > > I think my recent mail was not very clear, so i give more > > > > information. The plane tested is the C172p but i tested with > > > > the C310 its exactly the same problem. > > > > The joystick works fine in flightgear for 2 axes (0 and 2) > > > > and for the 8 buttons . For the axis 1 defined for the > > > > aileron, if i put the joystick forward the value of the axis > > > > in js_demo is "-1" : the aileron Right is up about +20 > > > > degrees The aileron Left is down - 20 degrees.The Joystick is > > > > put downward js_demo give "+1" for value and the aileron > > > > right is down -20 degrees the left up + 20 degrees. > > > > If i look at the FG Properties i Have : > > > > /input/joystiks/axis(1) > > > > FG properties > > > > binding/ > > > > desc[0]='Aileron'(unspecified). > > > > Another information before i was playing with an Joystick > > > > Microsoft Sidewinder Pro and i have no problem, but i changed > > > > my CPU from Athlon XP 1800 to Amd Athlon 64 X2 5200+. > > > > My new mothercard has no joystick entry so i buy this > > > > microsoft sidewinder USB. > > > > Thanks for your Help. > > > > Philippe Merlin > > > > > > > > Le lundi 4 février 2008, Philippe Merlin a écrit : > > > > > Hello, > > > > > i am on linux Debian lenny, the version of flightgear is > > > > > the 0.910. Recently i buy an sidewinder 8 button usb > > > > > joystick and it was recognized by Kde and js_demo and > > > > > seemed worked fine I defined for the 3 Axes . > > > > > Axes 0 Elevator > > > > > Axes 1 Aileron > > > > > Axes 3 Throttle > > > > > The js0.xml joined at this mail is produced by fgjs. > > > > > I look with the button 1 'view-cycle" and I watch when i > > > > > test the Axes 1 the ailerons are not going in the same way, > > > > > the right up the left down. Why ? Because this mistake i am > > > > > blocked. > > > > > I want help. > > > > > Thank you. > > > > > Philippe Merlin > > > > > > > > ------------------------------------------------------------- > > > >---- -------- This SF.net email is sponsored by: Microsoft > > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > > _______________________________________________ > > > > Flightgear-users mailing list > > > > Flightgear-users@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/flightgear-users > > > > > > --------------------------------------------------------------- > > >---------- This SF.net email is sponsored by: Microsoft > > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > _______________________________________________ > > > Flightgear-users mailing list > > > Flightgear-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/flightgear-users > > > > ----------------------------------------------------------------- > >-------- This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > _______________________________________________ > > Flightgear-users mailing list > > Flightgear-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/flightgear-users > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2008. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > Flightgear-users mailing list > Flightgear-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Flightgear-users mailing list Flightgear-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-users
