Hi,
I try to put FMENOFACTORY in setting service and it not work.
Thanks for your help.
mark2atsafe <[EMAIL PROTECTED]> escribió:
Hi,
To try and locate the problem, read the data into the FME Viewer but
change the source setting called SERVICE from FME to FMENOFACTORY -
this will exclude the SmallworldGeometryFactory from the process.
If this works OK, then the problem would be the factory, and you
should send it to our support team. If this still fails then I'm
thinking this is probably something that you should log with GE, since
it appears to me to be a problem on their side of the process.
I have heard about problems with splines in sw4 before, but I don't
know what the outcome was. In sw3 the splines would get vectorised but
would at least be read without error.
Hope this helps
Mark
Mark Ireland, Senior Product Specialist
Safe Software Inc. Surrey, BC, CANADA
[EMAIL PROTECTED] http://www.safe.com
Solutions for Spatial Data Translation, Distribution and Access
--- In [email protected], Mercedes Lucero <[EMAIL PROTECTED]> wrote:
>
> Hi Mark,
> I can not export all data to FFS. I have the same problem. If I
delete all geometry with type rational_b_spline, then FME export data
to Shape, SDE, ...
>
> Is data or type of data?
>
> In smallworld code I don't find any reference to rational_b_spline...
>
> Thanks.
>
> mark2atsafe <[EMAIL PROTECTED]> escribió:
> Hi,
> Is this definitely the writing, or is it maybe the reading? Sometimes
> it is difficult to tell. Can you read the data into the FME Viewer
> without the error?
>
> But it does sound like there is an issue with the data we are trying
> to write. Are you turning off the SmallworldGeometryFactory on the
> read? I think that might cause problems. There is (in the latest 2007
> betas) a transformer to validate geometry. Perhaps that would help to
> isolate any defective features.
>
> In any event, it ought not to crash. Perhaps you could write the data
> to FFS format instead of ArcSDE and send the FFS data to
> [EMAIL PROTECTED] - we'll then be able to examine it and try an SDE
> write here to locate the problem.
>
> Which version and build of FME are you using?
>
> Regards,
>
> Mark
>
> Mark Ireland, Senior Product Specialist
> Safe Software Inc. Surrey, BC, CANADA
> [EMAIL PROTECTED] http://www.safe.com
> Solutions for Spatial Data Translation, Distribution and Access
>
> --- In [email protected], "Mercedes Lucero" <mlucerod@> wrote:
> >
> > Hello,
> >
> > I am export datas from Smallworld (version 4.0) to ArcSDE and I have
> > some geometry with type rational_b_spline. When Fme try to write this
> > geometry, produce an error and leave from Fme application. I need
> > export all geometries, how can I export this type of geometries?
> >
> > Thanks.
> >
>
>
>
>
>
> __________________________________________________
> Correo Yahoo!
> Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
> Regístrate ya - http://correo.yahoo.es
>
---------------------------------
LLama Gratis a cualquier PC del Mundo.
Llamadas a fijos y móviles desde 1 céntimo por minuto.
http://es.voice.yahoo.com
