Daniel Rosenberg wrote:
> Ok, so this is perhaps rather uncommon. I guess the reason would be to
> improve readability and aesthetics -- it should be easy to read the
> text and it should look as good as possible.

Yes. The rationale is that small text is more readable if the glyphs are 
wider, whereas it’s not necessary for large text (on the contrary, you 
want to put a decent number of glyphs on a same line). The Latin Modern 
fonts are all from the same family (they all look similar), but the 
glyphs have been slightly adjusted and widened for the small sizes. The 
difference is obvious when displaying the same text at the same size 
with the several fonts.

This is really the same concern as having a dedicated font for small 
caps, or for different stretches. Only, this puts the level a bit 
higher.

And this is orthogonal to the format used to describe the font. In this 
case the vectorial format is not so much used to be able to display the 
font at different sizes, as to allow glyphs to be reproduced with a good 
precision at all resolutions (screen, low/high quality printer...).

I’m sure typographists from the pre-numeric era were used that concept.


> I do not see the way the operating system is involved, at least not if
> the fonts are embedded. If the feature is supported by the PDF
> standard it should be supported by the PDF reader. Am i right? But
> perhaps there could be problems if the fonts are not embedded?

Well, the question shouldn’t be formulated that way. PDF does not know 
anything about font resolution. All it knows is displaying some text 
with some given font at a given size.

Operating systems could be able to select the right font for the right 
size, but they simply don’t implement (to my knowledge) that feature 
which is relevant to high-level typography. So you have to do it 
yourself, or use a high-quality publishing application that does it for 
you. Unfortunately FOP isn’t one of them yet...

Vincent

---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to