Hi Vincent, I replaced the space-before with a space-after, since a conditionality=retain would move the table down.
The reason for the gap I could not find. I read numbers from the area tree and use them to calculate the pink blocks. But at the second pass the table is bigger. But reducing the blank block by nearly the height of the images keeps the images on the next page and solves most problems, still have to check for the two-breaks-table. Although I don't feel well with that solution. Well, may you (all) have a nice weekend, I'll bother you again next week. Georg Datterl ------ Kontakt ------ Georg Datterl Geneon media solutions gmbh Gutenstetter Straße 8a 90449 Nürnberg HRB Nürnberg: 17193 Geschäftsführer: Yong-Harry Steiert Tel.: 0911/36 78 88 - 26 Fax: 0911/36 78 88 - 20 www.geneon.de Weitere Mitglieder der Willmy MediaGroup: IRS Integrated Realization Services GmbH: www.irs-nbg.de Willmy PrintMedia GmbH: www.willmy.de Willmy Consult & Content GmbH: www.willmycc.de -----Ursprüngliche Nachricht----- Von: Vincent Hennebert [mailto:[email protected]] Gesendet: Freitag, 21. August 2009 12:09 An: [email protected] Betreff: Re: Strange table behaviour - Now with more columns! Hi Georg, Georg Datterl wrote: > Hi Vincent, hi everybody else, > > Since the table problems from the thread "Strange table behaviour" have been > reduced to well known fop problems, I implemented everything I learned in > that thread and started a two-column layout (see fo file). Now the gap is > back, which I thought I got rid of when removing the break-before. There also is a tiny gap when the table is not broken. You must have made mistakes when computing the sizes of the pink areas. But this is not the only problem. There is a conditional space between the two inner tables, that I guess fools the table algorithm the same way as a forced break. If you set the conditionality of that space to 'retain' the gap disappears. HTH, Vincent --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected] --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
