I am using Preseed default template for partition table, in it using Crypto
method for my hardware encryption.
Is there any way I can give a default password for it, so that I shouldn't
give password during the installation?
On Thursday, September 15, 2016 at 2:34:35 PM UTC+2, Akash Kaveti wrote:
> Thank you so much for the response. :)
> On Wednesday, September 14, 2016 at 4:40:14 PM UTC+2, Hauke Behrens wrote:
>> On 09/14/2016 03:04 PM, Akash Kaveti wrote:
>> > Hello Again,
>> > It is working now, I have check the syslog, the device I am trying to
>> > install is not there it seems,
>> > so I gave /dev/sdb, it is working now.
>> Glad I could help. :-)
>> > It is working for the current host, but what about the other hosts, Why
>> > cant I use "/d-i partman/early_command string debconf-set
>> > partman-auto/disk "$(list-devices disk | head -n1)/"
>> It's always hard to guess what device is getting used.
>> If you have a usb-stick plugged-in with the e.g. a formean-boot-iso,
>> that might be /dev/sda and your "real" hard-disk might be /dev/sdb/.
>> In that case "head -n2" will do the trick.
>> When using raid-devices this might be different too.
>> Also check out this thread:
>> bytemine GmbH, Im Technologiepark 4, 26129 Oldenburg
>> Support: 0441-309197-42 --- Vertrieb: 0441-309197-69
>> GF: Felix Kronlage -- AG in Oldenburg -- HRB 203 940
>> https://www.bytemine.net --- VAT-Number: DE267286778
You received this message because you are subscribed to the Google Groups
"Foreman users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
To post to this group, send email to email@example.com.
Visit this group at https://groups.google.com/group/foreman-users.
For more options, visit https://groups.google.com/d/optout.