This message is from the T13 list server.
How about ATA command overlap. Anybody actually using that much?
Curiously yours in breathtaking ignorance, Pat LaVarre
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Mon 12/2/2002 8:10 AM
To:
Cc: T13 List Server; [EMAIL PROTECTED]
Subject: Re: [t13] ATAPI Command Overlap
This message is from the T13 list server.
When I was at Tecmar/Overland Data developing ATAPI tape drives, we found
no
OS or application that used command overlap.
(Your mileage may vary!!!)
Thanx !!!
-----------------------------------------------------------------
Jim Hatfield
ATA Interface Firmware & T13 (ATA/ATAPI) Standards Representative
Seagate Technology - PSG
e-mail: [EMAIL PROTECTED]
s-mail: 389 Disc Drive; Longmont, CO 80501 USA
voice: 720-684-2120
fax : 720-684-2711
====================================================
"Sherry, John"
<John.Sherry@Ons To: T13 List Server
<[EMAIL PROTECTED]>
tream.com> cc:
Sent by: Subject: [t13] ATAPI Command
Overlap
owner-forum@t13.
org
No Phone Info
Available
12/02/2002 07:34
AM
Hi All,
Are there operating systems/drivers actually using command overlap for
ATAPI devices, and more specifically for ATAPI tape devices?
If so, which ones and from off which versions?
Thanks in advance
John Sherry (OnStream Data BV)
