This message is from the T13 list server.
I think some companies ( like Marvell and Promise ) have hardware which supports ATA command overlapping. ...Harlan on 12/2/02 7:29 AM, [EMAIL PROTECTED] wrote: >This message is from the T13 list server. > > >How about ATA command overlap. Anybody actually using that much? > >Curiously yours in breathtaking ignorance, Pat LaVarre > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] > Sent: Mon 12/2/2002 8:10 AM > To: > Cc: T13 List Server; [EMAIL PROTECTED] > Subject: Re: [t13] ATAPI Command Overlap > > > > This message is from the T13 list server. > > > > When I was at Tecmar/Overland Data developing ATAPI tape drives, we found > no > OS or application that used command overlap. > > (Your mileage may vary!!!) > > Thanx !!! > ----------------------------------------------------------------- > Jim Hatfield > ATA Interface Firmware & T13 (ATA/ATAPI) Standards Representative > Seagate Technology - PSG > e-mail: [EMAIL PROTECTED] > s-mail: 389 Disc Drive; Longmont, CO 80501 USA > voice: 720-684-2120 > fax : 720-684-2711 > ==================================================== > > > > > "Sherry, John" > > <John.Sherry@Ons To: T13 List Server ><[EMAIL PROTECTED]> > tream.com> cc: > > Sent by: Subject: [t13] ATAPI >Command Overlap > owner-forum@t13. > > org > > No Phone Info > > Available > > > > 12/02/2002 07:34 > > AM > > > > > > > > > > > > Hi All, > Are there operating systems/drivers actually using command overlap for > ATAPI devices, and more specifically for ATAPI tape devices? > > If so, which ones and from off which versions? > > Thanks in advance > John Sherry (OnStream Data BV) >
