This message is from the T13 list server.
A new revision of http://www.t13.org/docs2004/e03124r3-HPA_State_Diagram.pdf has been posted. -----Original Message----- From: Karen Zelenko Sent: Monday, November 15, 2004 6:12 PM To: [EMAIL PROTECTED] Subject: Updated HPA state diagram Attached is updated HPA State Diagram. Following issues were fixed: 1. Eliminated two steps in SET MAX ADDRESS (EXT) commands representation. Added description on page 1. 2. Fixed several transition problems reported by WD and Seagate. 3. Fixed non-volatile SET MAX command transition after power cycle problem reported by WD. Please, note the description for Non-volatile 2 state is changed from the previous version of the document. 4. Addressed mixed 28 and 48 bit commands mode. List of known issues: 1. Diagram doesn't address yet SET MAX ADDRESS with Native Max command for hard drives with more than 137 GB. 2. Diagram doesn't address yet the maximum number of failed attempts to unlock. 3. Diagram is still implemented on Visio. I would highly appreciate your feedback on the updated document. Thank you, Karen Zelenko SPE Architecture Team Phoenix Technologies Ltd. 915 Murphy Ranch Road Milpitas, CA 95035 Office : 408-570-1418 Best Regards, Daniel J. Colegrove Hitachi Global Storage Technologies [EMAIL PROTECTED] (702) 614-6119
