In a message dated 5/17/01 10:39:30 AM Pacific Daylight Time,
[EMAIL PROTECTED] writes:
> I just have come across a problem with outputed D-Code sizes in Protel
> 99SE. On a DS pcb, I made some large ground planes in various areas
> instead of using the copper pour option. When I outputed the gerbers in
> RS274 format, some of the DCodes were >3.0" by >1.0". Obviously the
> plotter house cryed wolf. If you output the aperture tables (the old
> way) you can put a size restriction on the aperture size. It appears
> that this is not possible in RS 274 format.
>
> Has anyone had this problem?
>
> Jim Gardner
> SiGEM Inc.
Jim:
There is a maximum aperature size option that should be set. It is located
in the Aperature menu of the Gerber properties section associated with the
CAM output files. Right click on the gerber entry in the CAM output window
and select Properties to access the menu.
Brock Russell
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
