At 00:31 23.05.01 -0700, you wrote:
>Yes, the numbers seem wrong. I get the same type of result on my boards.
>
>About the SMD pad count -- using Reports | Board Information | Report,
>select Layer Information. The TopLayer pad count should be the number you
>want. (It matches Jeff Stout's calculation on my board.)
Hey, good guy! That's exactly what I needed, but it doesn't matches the
calculations from Jeff Stout. At least what the TOP-layer SMD pads
concerns. I have found some BOTTOM-Layer SMD pads (Spark gaps)!
The layer information seems to give a belivable number.
Thanks to all for helping me
Edi
>-----Original Message-----
>From: Edi Im Hof [mailto:[EMAIL PROTECTED]]
>Sent: Wednesday, May 23, 2001 12:07 AM
>
>Thanks for all the suggestions.
>I'm sure now I'll find a way to count my SMD-Pads approximatly. Most
>propably by the "calculate" way. I don't need the exact count.
>
>Do you agree that the report reports a wrong number of Pad Paste Mask Count?
>Or have I misunderstod something? I think a bug.
>
>Edi
>
>At 16:51 22.05.01 +0200, you wrote:
>
> >Hi all
> >
> >I try to find out how many SMD-pad I have in my design.
> >
> >I generated a report (Reports|Board Information|Report) for the primitivs
> >"Pad solder mask", "Pad paste mask" and "Via solder mask"
> >
> >
> >The report:
> >
> >Specifications For 10341500.pcb
> >On 22-May-2001 at 16:41:59
> >
> >
> >
> > Pad Solder Mask Count
> >----------------------------------
> > 0.1016mm (4mil) 1307
> >----------------------------------
> > Total 1307
> >
> >
> > Pad Paste Mask Count
> >----------------------------------
> > 0mm (0mil) 1307
> >----------------------------------
> > Total 1307
> >
> >
> > Via Solder Mask Count
> >----------------------------------
> > 0.1016mm (4mil) 342
> >----------------------------------
> > Total 342
> >
> >
> >Now am I a bit puzzled. Protel counts the same amount of Pad Solder and
> >Past Mask, but I have a mixed SMD/TH board. I assumed the Paste Mask count
> >should be smaller as only SMD pad are having paste maks openings????
> >
> >Anybody an idea what's wrong?
> >
> >I need the Paste Mask cout for an offer for an Laser Stencil
> >(www.schablone.de).
> >
> >TIA
> >Edi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
