Ted,
The .ins is just a text file, you could use notepad or wordpad -- but you
don't need to edit the .ins file -- the reference to PBRUSH there is just a
comment.
As far as the .ini file goes, on my Win2K-sp1 system, from Run... either
pbrush.exe or mspaint.exe gets you the same program. However, I found that
I had to edit the client99se.ini to have the full path:
RunPictureEditor=C:\WINNT\system32\MSPAINT.EXE
For some reason, just having "mspaint.exe" didn't work.
Dwight Harm
Trax Softworks, Inc.
> -----Original Message-----
> From: Ted Tontis [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, May 24, 2001 2:11 PM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] Manual route rats nest jump
>
>
> how does one edit the .ins files
>
> Ted
>
> -----Original Message-----
> From: Rusty Garfield [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, May 24, 2001 3:10 PM
>
<snip>
> Make your own icons and the caps as you see them below.
> By the way if you are running winn2000 you will have to change PBRUSH.EXE
> with MSPAINT.EXE in two files. Client99se.ini under winnt and
Client99se.ins under design
> explorer 99 se. Otherwise your icon editor will not work with client.
<snip>
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
