I doubt it (camera), we usually insist on having good spec dwgs of the
parts AND use a calipers for confirmation, but let the dwg take
precedence unless there are missing or wrong dims on the dwgs (which
there generally are)
Dennis Saputelli
Mamdouh Wahab wrote:
>
> Greetings to all,
>
> I am laying out a board that will connect to a generic daughter
> board. The connection between them is through a Board to Board
> (header/socket) connector plus aligned holes for mounting.
> I have the physical (component populated) daughter board,
> I am trying to measure the different distances and coordinates
> using a digital calliper.
> However, the 1st prototype had some misalignment although I
> was carefull in taking the measurement.
> My question is-
> Is there a preciese way of taking the coordinates of the connectors
> and holes on the physical daughter board?
> I thought of taking a digital picture of the board export it to a CAD
> or Drawing software and do the measurments there. Is this the way to go?
>
> Thanks
> Mamdouh Wahab
--
___________________________________________________________________________
www.integratedcontrolsinc.com Integrated Controls, Inc.
tel: 415-647-0480 2851 21st Street
fax: 415-647-3003 San Francisco, CA 94110
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
