Or run the update twice. The second time the error should go away.
I've seen this since the first time it tries to match the pins before it
changes the component. The second time the component has changed and now
the pins match.
Rob
"Pierce, Scott" <[EMAIL PROTECTED]> on 06/27/2001 11:16:55 AM
Please respond to "Protel EDA Forum" <[EMAIL PROTECTED]>
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
cc: (bcc: Rob LaMoreaux/DSPT)
Subject: [PEDA] Design Update
Hi all,
I just called Protel and got my answer. You can't go from a 2 pin connector
P1
to a 3 pin connector with the same Reference Disignator P1. You have to
delete the 2 pin connector from the board first, then the update will work.
It seems the system can't deal with it because of the different pin count.
Scott L. Pierce
Krautkramer, Inc.
50 Industrial Park Rd.
Lewistown, Pa. 17044
(717) 242-0320 ext. 396
Fax: (717) 242-2990
E-mail: [EMAIL PROTECTED]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
