forums  

Messages by Thread

• [PEDA] Origin anomaly Fabian Hartery
• [PEDA] Layer Stackup Legend does not work !!!!! Protel Support does not solve this problem Michael Schmitt
  • Re: [PEDA] Layer Stackup Legend does not work !!!!! Protel Support does not solve this problem Wolfgang . Geier
  • Re: [PEDA] Layer Stackup Legend does not work !!!!! Protel Support does not solve this problem Rudolf Schaffer
  • Re: [PEDA] Layer Stackup Legend does not work ! Dave Eloranta
• [PEDA] Schematic directives Francisco Simões
  • Re: [PEDA] Schematic directives Waldemar Kulajew
  • Re: [PEDA] Schematic directives john
• [PEDA] PCB Print crash Cam Andruik
  • Re: [PEDA] PCB Print crash Jason Morgan
  • Re: [PEDA] PCB Print crash Burt Bicksler
  • Re: [PEDA] PCB Print crash Juergen Paape
• [PEDA] SPECCTRA interface ga
  • Re: [PEDA] SPECCTRA interface Mike Reagan
  • Re: [PEDA] SPECCTRA interface ga
• [PEDA] Trace width & spacing for AC Jeff Jolie
  • Re: [PEDA] Trace width & spacing for AC Abd ul-Rahman Lomax
  • Re: [PEDA] Trace width & spacing for AC Waldemar Kulajew
  • Re: [PEDA] Trace width & spacing for AC Abd ul-Rahman Lomax
  • Re: [PEDA] Trace width & spacing for AC Linden Doyle
  • Re: [PEDA] Trace width & spacing for AC Thomas
  • Re: [PEDA] Trace width & spacing for AC Michael Schmitt
  • Re: [PEDA] Trace width & spacing for AC Andy Gulliver
• [PEDA] German contributors lloyd . good
• [PEDA] select hole size Dave Eloranta
  • Re: [PEDA] select hole size Colby - PowerStream
  • Re: [PEDA] select hole size - Protel is really being stupid about this Dennis Saputelli
  • Re: [PEDA] select hole size Aalt Lokhorst
• Re: [PEDA] Viewing a PADS file Wolfgang
• [PEDA] Track Width in Autorouting Fábio Rizental Coutinho
  • Re: [PEDA] Track Width in Autorouting Colby - PowerStream
  • Re: [PEDA] Track Width in Autorouting Ian Wilson
  • Re: [PEDA] Track Width in Autorouting Colby - PowerStream
  • Re: [PEDA] Track Width in Autorouting Abd ul-Rahman Lomax
  • Re: [PEDA] New software from Protel? (ex Track Width in Autorouting) Geoff Harland
• Re: [PEDA] Simple Improvements- Track Placement/Acrobat 5.0 ga
  • [PEDA] Viewing a PADS file Tim Hutcheson
• Re: [PEDA] Making Macros, WAS: Simple Improvements Thomas
• [PEDA] FW: Netclass information Phil So
• [PEDA] P-CAD 2001 to Protel 99SE PCB Nicholas Piccinich
  • Re: [PEDA] P-CAD 2001 to Protel 99SE PCB Abd ul-Rahman Lomax
  • Re: [PEDA] P-CAD 2001 to Protel 99SE PCB Nicholas Piccinich
• [PEDA] Component Field Problem Fábio Rizental Coutinho
  • Re: [PEDA] Component Field Problem Abd ul-Rahman Lomax
• [PEDA] design objects not displayed Ken Henrich
  • Re: [PEDA] design objects not displayed Dwight Harm
  • Re: [PEDA] design objects not displayed Ian Wilson
  • Re: [PEDA] design objects not displayed Abd ul-Rahman Lomax
• [PEDA] Netclass information Phil So
  • Re: [PEDA] Netclass information Ian Wilson
  • Re: [PEDA] Netclass information Greg . North
  • [PEDA] Autorouting problem Mamdouh Wahab
  • Re: [PEDA] Autorouting problem Abd ul-Rahman Lomax
  • Re: [PEDA] Netclass information Abd ul-Rahman Lomax
• [PEDA] Simple Improvements pcb
  • Re: [PEDA] Simple Improvements Andrew J Jenkins
  • Re: [PEDA] Simple Improvements Abd ul-Rahman Lomax
  • [PEDA] Performance tweaks Tim Hutcheson
  • Re: [PEDA] Simple Improvements- Track Placement/Acrobat 5.0 Frank Langlois
  • [PEDA] Acrobat 5.0 Frank Langlois
  • Re: [PEDA] Simple Improvements Dennis Saputelli
  • [PEDA] Making Macros, WAS: Simple Improvements Joop Reekers
  • Re: [PEDA] Making Macros, WAS: Simple Improvements Aalt Lokhorst
  • [PEDA] Adding Move-String etc long and detailed (Ex: Making Macros, ...) Ian Wilson
• Re: [PEDA] Explanation - Problems generating Cam files Brad Velander
  • Re: [PEDA] Explanation - Problems generating Cam files Mike Reagan
• [PEDA] Protel license Roger McLain
  • Re: [PEDA] Protel license Abd ul-Rahman Lomax
• Re: [PEDA] TOP TIP (was wish list) Coleman, Tim
• [PEDA] Wish List Jenkins, Charlie
  • Re: [PEDA] Wish List John Williams
  • Re: [PEDA] Wish List David Cary
  • Re: [PEDA] Wish List john
  • [PEDA] Explanation - Problems generating Cam files Fábio Rizental Coutinho
• [PEDA] Wish for schematic feature Rene Tschaggelar
• [PEDA] Protel Bug Report Jason Morgan
  • Re: [PEDA] Protel Bug Report Ian Wilson
• [OT] Gerber vs PCB files Thomas
  • Re: [OT] Gerber vs PCB files John Haddy
  • Re: [OT] Gerber vs PCB files Geoff Harland
  • Re: [OT] Gerber vs PCB files Andrew W. Riley III
  • Re: [OT] Gerber vs PCB files Ian Wilson
  • Re: [OT] Gerber vs PCB files Abd ul-Rahman Lomax
  • Re: [OT] Gerber vs PCB files Richard Thompson
• Re: [PEDA] Is there a Protel Viewer? Fabian Hartery
  • Re: [PEDA] Is there a Protel Viewer? Rick Smith
• [PEDA] Problems generating CAM files Fábio Rizental Coutinho
  • Re: [PEDA] Problems generating CAM files Brad Velander
  • Re: [PEDA] Problems generating CAM files Mike Reagan
  • Re: [PEDA] Problems generating CAM files Mike Reagan
  • Re: [PEDA] Problems generating CAM files Dennis Saputelli
  • Re: [PEDA] Problems generating CAM files Mike Reagan
  • Re: [PEDA] Problems generating CAM files Edi Im Hof
  • Re: [PEDA] Problems generating CAM files Abd ul-Rahman Lomax
  • Re: [PEDA] Problems generating CAM files Brad Velander
  • Re: [PEDA] Problems generating CAM files Brad Velander
• Re: [PEDA] Electrical Testing, WAS: How do I modify the design rules to allow a shorted li nk to gnd? rlamoreaux
• [PDEV] Program Wincupl 5.0 websitevisitor
• Re: [PEDA] Part Drawings lloyd . good
  • Re: [PEDA] Part Drawings Abd ul-Rahman Lomax
  • Re: [PEDA] Part Drawings Dennis Saputelli
• [PEDA] Autotrax V. 1.58 Drill Drawing MSIsallen
  • Re: [PEDA] Autotrax V. 1.58 Drill Drawing lloyd . good
• Re: [PEDA] 16-bit and 99SE Compatability ga
  • Re: [PEDA] 16-bit and 99SE Compatability Brad Velander
• [PEDA] Placement Rules Jason Morgan
  • [PEDA] 16-bit and 99SE Compatability Robert Ritchey
  • Re: [PEDA] 16-bit and 99SE Compatability Jon Elson
  • Re: [PEDA] Placement Rules Colby - PowerStream
  • Re: [PEDA] Placement Rules Abd ul-Rahman Lomax
  • Re: [PEDA] Placement Rules Dennis Saputelli
• [PEDA] Layer details Rudolf Schaffer
• [PEDA] Small bug in PCBLib editor Ian Wilson
  • Re: [PEDA] Small bug in PCBLib editor Abd ul-Rahman Lomax
• [PEDA] Revision Control van de Werken, Matthew (DEM, PH)
  • Re: [PEDA] Revision Control John Haddy
  • Re: [PEDA] Revision Control Abd ul-Rahman Lomax
  • Re: [PEDA] Revision Control Don Ingram
  • [PEDA] Is there a Protel Viewer? BOB JONES
  • Re: [PEDA] Is there a Protel Viewer? Abd ul-Rahman Lomax
  • Re: [PEDA] Is there a Protel Viewer? Rene Tschaggelar
  • Re: [PEDA] Is there a Protel Viewer? Isabelle BAUDRY
• [PEDA] Quickly checking sync status between PCB & schematic van de Werken, Matthew (DEM, PH)
  • Re: [PEDA] Quickly checking sync status between PCB & schematic Ian Wilson
  • Re: [PEDA] Quickly checking sync status between PCB & schematic Abd ul-Rahman Lomax
  • Re: [PEDA] Quickly checking sync status between PCB & schematic van de Werken, Matthew (DEM, PH)
  • Re: [PEDA] Quickly checking sync status between PCB & schematic van de Werken, Matthew (DEM, PH)
  • Re: [PEDA] Quickly checking sync status between PCB & schematic Ian Wilson
  • Re: [PEDA] Quickly checking sync status between PCB & schematic David Cary
  • Re: [PEDA] Quickly checking sync status between PCB & schematic Abd ul-Rahman Lomax
  • Re: [PEDA] Libray control [was Quickly checking sync status between PCB & schematic] Michael Beavis
  • Re: [PEDA] Libray control [was Quickly checking sync status between PCB & schematic] Ian Wilson
  • Re: [PEDA] Libray control Colin Weber
  • Re: [PEDA] Libray control [was Quickly checking sync status between PCB & schematic] Abd ul-Rahman Lomax
  • Re: [PEDA] Libray control [was Quickly checking sync status between PCB & schematic] Dennis Saputelli
  • Re: [PEDA] Quickly checking sync status between PCB & schematic Ian Wilson
  • Re: [PEDA] Quickly checking sync status between PCB & schematic Abd ul-Rahman Lomax
  • Re: [PEDA] Quickly checking sync status between PCB & schematic lloyd . good
  • Re: [PEDA] Quickly checking sync status between PCB & schematic van de Werken, Matthew (DEM, PH)
  • Re: [PEDA] Quickly checking sync status between PCB & schematic van de Werken, Matthew (DEM, PH)
  • Re: [PEDA] Quickly checking sync status between PCB & schematic Abd ul-Rahman Lomax
• Re: [PEDA] How do I modify the design rules to allow a shorted li nk to gnd? Brad Velander
  • Re: [PEDA] How do I modify the design rules to allow a shorted li nk to gnd? Jon Elson
  • Re: [PEDA] How do I modify the design rules to allow a shorted li nk to gnd? Abd ul-Rahman Lomax
  • [PEDA] virtual shorts and round-off error in plots Abd ul-Rahman Lomax
  • Re: [PEDA] How do I modify the design rules to allow a shorted li nk to gnd? Brad Velander
  • Re: [PEDA] How do I modify the design rules to allow a shorted li nk to gnd? Jon Elson
  • Re: [PEDA] How do I modify the design rules to allow a shorted li nk to gnd? Dennis Saputelli
  • Re: [PEDA] How do I modify the design rules to allow a shorted li nk to gnd? Brad Velander
  • Re: [PEDA] Electrical Testing, WAS: How do I modify the design rules to allow a shorted li nk to gnd? Bagotronix Tech Support
• [PEDA] DESIGN UPDATE Pierce, Scott
  • [PEDA] Design Update Pierce, Scott
  • Re: [PEDA] DESIGN UPDATE ga
  • Re: [PEDA] Design Update rlamoreaux
• [PEDA] How do I modify the design rules to allow a shorted link to gnd? Coleman, Tim
  • Re: [PEDA] How do I modify the design rules to allow a shorted link to gnd? Abd ul-Rahman Lomax
• [PEDA] AW: Pad With Slotted Hole Georg Beckmann
  • Re: [PEDA] AW: Pad With Slotted Hole Richard Barsczewski
  • Re: [PEDA] AW: Pad With Slotted Hole Abd ul-Rahman Lomax
  • Re: [PEDA] AW: Pad With Slotted Hole Brad Velander
  • Re: [PEDA] AW: Pad With Slotted Hole Brian Guralnick
  • Re: [PEDA] AW: Pad With Slotted Hole Ian Wilson
  • Re: [PEDA] AW: Pad With Slotted Hole Dennis Saputelli
  • [PEDA] DC Connectors (Ex: Pad With Slotted Hole) Ian Wilson
  • Re: [PEDA] AW: Pad With Slotted Hole Abd ul-Rahman Lomax
  • Re: [PEDA] AW: Pad With Slotted Hole Brian Guralnick
  • Re: [PEDA] AW: Pad With Slotted Hole Richard Barsczewski
  • Re: [PEDA] AW: Pad With Slotted Hole Richard Thompson
  • Re: [PEDA] AW: Pad With Slotted Hole Cliff Lawrence
  • Re: [PEDA] AW: Pad With Slotted Hole Richard Thompson
  • Re: [PEDA] AW: Pad With Slotted Hole Abd ul-Rahman Lomax
• Re: [PEDA] Pad With Slotted Hole Jason Morgan
  • Re: [PEDA] Pad With Slotted Hole lloyd . good
  • Re: [PEDA] Pad With Slotted Hole Linden Doyle
• [PDEV] Protel User Mailing Lists Abd ulraHman Lomax
• [OT] Protel User Mailing Lists Abd ul-Rahman Lomax
• [PEDA] Protel User Mailing Lists Abd ul-Rahman Lomax
• [PEDA] Ground Planes Connection Jerome DUMAS
  • Re: [PEDA] Ground Planes Connection Rolf Molitor
  • Re: [PEDA] Ground Planes Connection Abd ul-Rahman Lomax
  • Re: [PEDA] Ground Planes Connection Brian Guralnick
  • Re: [PEDA] Ground Planes Connection Ian Wilson
  • Re: [PEDA] Ground Planes Connection Brian Guralnick
  • Re: [PEDA] Ground Planes Connection David Want
  • Re: [PEDA] Ground Planes Connection David Want
  • [PEDA] Pad With Slotted Hole Rob Porter
  • Re: [PEDA] Pad With Slotted Hole BOB JONES
• [PEDA] Co-ords in Protel 99SE SP6 PCB Richard Thompson
  • Re: [PEDA] Co-ords in Protel 99SE SP6 PCB Ian Wilson
  • Re: [PEDA] Co-ords in Protel 99SE SP6 PCB Ian Wilson
  • Re: [PEDA] Co-ords in Protel 99SE SP6 PCB Brian Guralnick
  • Re: [PEDA] Co-ords in Protel 99SE SP6 PCB Brad Velander
  • Re: [PEDA] Co-ords in Protel 99SE SP6 PCB Abd ul-Rahman Lomax
• [PEDA] Thank you Aalt Lokhorst
• [PEDA] New Libraries Available for Download! Protel CSC
• Re: [PEDA] CLARIFICATION: Speed problem with Protel 99SE in PCB e ditor ! Brad Velander
  • Re: [PEDA] CLARIFICATION: Speed problem with Protel 99SE in PCB e ditor ! Colby - PowerStream
  • Re: [PEDA] CLARIFICATION: Speed problem with Protel 99SE in PCB e ditor ! Brendon Slade
  • Re: [PEDA] CLARIFICATION: Speed problem with Protel 99SE in PCB e ditor ! Darren Moore
  • Re: [PEDA] CLARIFICATION: Speed problem with Protel 99SE in PCB e ditor ! Brad Velander

• Earlier messages