Frank Langlois wrote:
> When printing to the new Acrobat 5.0 it is now necessary to change the
>Conversion Settings from "ebook" to "print" each time a schematic or PCB
plot is
>done or no plot will be generated. The default settings for the HP1120
print
>quality always override the settings saved in Protel but that is probably
not a
>Protel problem.
Do you really think so? I installed Acrobat 5 and print as well schematics
as PCB plots to the Acrobat Writer without any problems and without
changing a single item of the Acrobat Writer default setup. Maybe you have
some other kind of problem?
>>- Many of the print setup options of the CAM manager and schematic print
>>setup have to be re-entered each time even though they have been saved.
>
>No, I don't think so, at least not with the CAM manager. This would
require
>a better explanation. If you want to re-use a CAM setup with a new file,
>just copy it and, if needed, rename it.
Indeed, every time setup options of the CAM manager have to be entered
anew, whether you copy an old set or not. This is the case, for instance,
if you do not use exactly the same number and kind of layer definitions
with different DDB jobs. Copy works alright, but if you use that, you have
to go through the layer setup of the print setup again, if the layer stack
is not absolutely identical to the one used with the other job.
Gisbert Auge
N.A.T. GmbH
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
