That's correct Base ------Original Message------ From: jtwork Sender: [email protected] To: [email protected] ReplyTo: Open Source GPS-related discussion and support Subject: Re: [FOSS-GPS] Using RTKLib with Novatel OEM device as base Sent: Aug 27, 2014 8:44 PM
Thanks for your reply. I'm connecting to both of them over the network actually. I have telnet into the Novatel and see that it outputs all of the messages I specify correctly, but I'll try disabling the RTCM and enabling only the OEM messages listed in the documentation and see if that helps. The OEMV-3 is listed as a "triple frequency + L-band" receiver. Just to check, should I be connecting to the Novatel as a "base station" or as "corrections"? Those two options are a bit confusing to me.. -- View this message in context: http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/Using-RTKLib-with-Novatel-OEM-device-as-base-tp7572967p7572972.html Sent from the Open Source GPS-related discussion and support mailing list archive at Nabble.com. _______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS Sent via my BlackBerry from Vodacom - let your email find you! _______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
