Good evening Could you send me some sample data as well as the exact model of your receiver
Regards Anton On Tue, Sep 2, 2014 at 8:35 PM, john taflan <[email protected]> wrote: > Hello, > > I developed a simple script to take the log output, parse it for the hex I > actually want, and output that back to rtknavi. I have verified that my > script is sending the bytes properly, and matched up one of the messages > (RAWWAASFRAME) to the spec in the Novatel manual. > > I've tried both outputting sets of 16 bytes at a time, or holding all the > bytes until I have a full message and sending that all at once. In both > cases, I can see RTKlib get the hex properly, but it never parses it as an > OEM message. At this point I'm really not sure what to do, since I know > for sure the proper data is sending (I checked every part of the packet > structure!), but rtklib just isn't recognizing it! > > > On Thu, Aug 28, 2014 at 12:41 PM, Anton Strydom <[email protected]> > wrote: > >> Hi there >> >> On certain Novatel receivers you can get the proper data via TCP I am >> just not sure which ones, The ones I use only have 3 com ports rs232 and >> bluetooth and I get good data from them >> >> Regards >> >> >> >> On Thu, Aug 28, 2014 at 5:00 PM, jtwork <[email protected]> wrote: >> >>> I think I may have discovered the issue... I'm reading the 'log' >>> information, >>> which is this odd formatted binary info. It looks like in order to >>> actually >>> get the raw binary I have to connect via the serial like you suggested, >>> however that is impossible in my case since that port is in active use by >>> someone else.. plus I don't actually have physical access to it! >>> >>> So, I guess unless there's some way to enable raw output over the network >>> connection, or I write some weird parser, I won't be using this method... >>> >>> >>> >>> -- >>> View this message in context: >>> http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/Using-RTKLib-with-Novatel-OEM-device-as-base-tp7572967p7572977.html >>> Sent from the Open Source GPS-related discussion and support mailing >>> list archive at Nabble.com. >>> _______________________________________________ >>> This message is sent to you from [email protected] mailing list. >>> >>> Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your >>> subscription >>> For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS >>> >> >> >> _______________________________________________ >> This message is sent to you from [email protected] mailing list. >> Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your >> subscription >> For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS >> > > > _______________________________________________ > This message is sent to you from [email protected] mailing list. > Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your > subscription > For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS >
_______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
