-------------------------------------------- Em qui, 4/9/14, jtwork <[email protected]> escreveu:
Assunto: Re: [FOSS-GPS] [Spam] Re: Using RTKLib with Novatel OEM device as base Para: [email protected] Data: Quinta-feira, 4 de Setembro de 2014, 14:40 Dera John, i did not read all thread, i apologise if my answer are redundant. long time ago i wrote some code for a HP200 palmtop to talk with a Novatel DL4. I remember i sent commands thru DL4tools.exe CDU.exe or thru a serial port terminal application. a) set the receiver communication port baudrate and save the configuration ( receiver NVRAN ) Receiver COM1 and COM2 are bidirectional but i remember a have to build a adapter to swap pins 2 and 3 TX RX to use an USB-serial-cable. gross mode: com com1 115200 n 8 1 n saveconfig b) set the receiver do output raw data trhu serial port. it is possible to log data and sent it thru serial port at same time. the sintaxe was like:B=binary A=ascii rangecmpA LOG where what how you can use bestposA to check the communication. log FILE RANGECMPB on time 1 log COM1 RANGECMPB on time 1 log com1 BESTPOSA on time 1 save config for rtklib you can set: log com1 rangecmpb ontime 1 log com1 rawephemb onnew log com1 ionutcb onnew log com1 rawwaasframeb onnew log com1 gloephemerisb onnew save config please, this are just directions, i am not sure about your receiver. i hope it helps. julio menezes _______________________________________________ This message is sent to you from [email protected] mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
