I use a Tool called NetMRG, My question is how does "packet count" translate to bit/sec or byte/sec traffic, or if that is even possible.
Thanks, John On Thu, 2 Dec 2004 11:41:55 -0800, Ivan Batanov <[EMAIL PROTECTED]> wrote: > There is a tool called Chirp that automatically generates cricket config > files and supports Foundry SI - http://sourceforge.net/projects/chirp/. > > The OIDs that you need are: > > $snL4VirtualServerTableOID = ".1.3.6.1.4.1.1991.1.1.4.2.1.1"; > $snL4RealServerTableOID = ".1.3.6.1.4.1.1991.1.1.4.3.1.1"; > > $snL4VirtualServerPortTableOID = ".1.3.6.1.4.1.1991.1.1.4.4.1.1"; > $snL4RealServerPortTableOID = ".1.3.6.1.4.1.1991.1.1.4.5.1.1"; > > "snL4RealServerStatisticReceivePkts" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.3'; > "snL4RealServerStatisticTransmitPkts" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.4'; > "snL4RealServerStatisticCurConnections" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.5'; > "snL4RealServerStatisticTotalConnections" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.6'; > "snL4RealServerStatisticFailTime" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.12'; > "snL4RealServerStatisticPeakConnections" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.13'; > > "snL4RealServerPortStatisticState" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.5'; > "snL4RealServerPortStatusFailTime" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.6'; > "snL4RealServerPortStatusCurrentConnection" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.7'; > "snL4RealServerPortStatusTotalConnection" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.8'; > "snL4RealServerPortStatusPeakConnection" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.13'; > "snL4RealServerPortStatusRxPkts" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.9'; > "snL4RealServerPortStatusTxPkts" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.10'; > "snL4RealServerPortStatusRxBytes" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.11'; > "snL4RealServerPortStatusTxBytes" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.12'; > > "snL4VirtualServerStatisticReceivePkts" = > '.1.3.6.1.4.1.1991.1.1.4.25.1.1.3'; > "snL4VirtualServerStatisticTransmitPkts" = > '.1.3.6.1.4.1.1991.1.1.4.25.1.1.4'; > "snL4VirtualServerStatisticTotalConnections" = > '.1.3.6.1.4.1.1991.1.1.4.25.1.1.5'; > > "snL4VirtualServerPortStatisticCurrentConnection" = > '.1.3.6.1.4.1.1991.1.1.4.26.1.1.4'; > "snL4VirtualServerPortStatisticTotalConnection" = > '.1.3.6.1.4.1.1991.1.1.4.26.1.1.5'; > "snL4VirtualServerPortStatisticPeakConnection" = > '.1.3.6.1.4.1.1991.1.1.4.26.1.1.6'; > > Hope this helps, > > Ivan Batanov > Earthlink, Inc (AS4355) > Manager Network Engineering > Phone (626) 296 5444 > Email: [EMAIL PROTECTED] > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of John > Willingham > Sent: Thursday, December 02, 2004 9:52 AM > To: [email protected] > Subject: [f-nsp] ServerIron SNMP Values > > Greetings, > > Is it possible to collect SNMP data on individual real/virtual > servers via SNMP on a ServerIron XL. I have done some digging but none > of the values that I have pulled up seem to be worthwhile. I am just > wondering if someone has experience with SNMP values with regards to the > ServerIron. > > Thanks and Have a Great Day, > > > John S. Willingham _______________________________________________ > > > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > > From [EMAIL PROTECTED] Thu Dec 2 15:21:00 2004 From: [EMAIL PROTECTED] (Ivan Batanov) Date: Thu Dec 2 15:22:03 2004 Subject: [f-nsp] ServerIron SNMP Values In-Reply-To: <[EMAIL PROTECTED]> Message-ID: <[EMAIL PROTECTED]> John, The packet and bit rate are related as follows (don't want to open a discussion on this): packet rate * avg packet size = bit rate. You can get both packets and bytes counters from the Foundry SI MIB. You may also want to monitor the total and concurrent number of connections, as well as the CPU utilization (>80% is really bad). oid snaggblcpuutil1minavg .1.3.6.1.4.1.1991.1.1.2.1.52.0 oid snl4realserverportstatuscurrentconnection .1.3.6.1.4.1.1991.1.1.4.24.1.1.7 oid snl4realserverportstatuspeakconnection .1.3.6.1.4.1.1991.1.1.4.24.1.1.13 oid snl4realserverportstatusrxbytes .1.3.6.1.4.1.1991.1.1.4.24.1.1.11 oid snl4realserverportstatusrxpkts .1.3.6.1.4.1.1991.1.1.4.24.1.1.9 oid snl4realserverportstatustotalconnection .1.3.6.1.4.1.1991.1.1.4.24.1.1.8 oid snl4realserverportstatustxbytes .1.3.6.1.4.1.1991.1.1.4.24.1.1.12 oid snl4realserverportstatustxpkts .1.3.6.1.4.1.1991.1.1.4.24.1.1.10 oid snl4realserverstatisticcurconnections .1.3.6.1.4.1.1991.1.1.4.23.1.1.5 oid snl4realserverstatisticreceivepkts .1.3.6.1.4.1.1991.1.1.4.23.1.1.3 oid snl4realserverstatistictotalconnections .1.3.6.1.4.1.1991.1.1.4.23.1.1.6 oid snl4realserverstatistictransmitpkts .1.3.6.1.4.1.1991.1.1.4.23.1.1.4 oid snl4virtualserverportstatisticcurrentconnection .1.3.6.1.4.1.1991.1.1.4.26.1.1.4 oid snl4virtualserverportstatistictotalconnection .1.3.6.1.4.1.1991.1.1.4.26.1.1.5 oid snl4virtualserverstatisticreceivepkts .1.3.6.1.4.1.1991.1.1.4.25.1.1.3 oid snl4virtualserverstatistictotalconnections .1.3.6.1.4.1.1991.1.1.4.25.1.1.5 oid snl4virtualserverstatistictransmitpkts .1.3.6.1.4.1.1991.1.1.4.25.1.1.4 -Ivan -----Original Message----- From: John Willingham [mailto:[EMAIL PROTECTED] Sent: Thursday, December 02, 2004 12:08 PM To: Ivan Batanov Cc: [email protected] Subject: Re: [f-nsp] ServerIron SNMP Values I use a Tool called NetMRG, My question is how does "packet count" translate to bit/sec or byte/sec traffic, or if that is even possible. Thanks, John On Thu, 2 Dec 2004 11:41:55 -0800, Ivan Batanov <[EMAIL PROTECTED]> wrote: > There is a tool called Chirp that automatically generates cricket > config files and supports Foundry SI - > http://sourceforge.net/projects/chirp/. > > The OIDs that you need are: > > $snL4VirtualServerTableOID = ".1.3.6.1.4.1.1991.1.1.4.2.1.1"; > $snL4RealServerTableOID = ".1.3.6.1.4.1.1991.1.1.4.3.1.1"; > > $snL4VirtualServerPortTableOID = ".1.3.6.1.4.1.1991.1.1.4.4.1.1"; > $snL4RealServerPortTableOID = ".1.3.6.1.4.1.1991.1.1.4.5.1.1"; > > "snL4RealServerStatisticReceivePkts" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.3'; > "snL4RealServerStatisticTransmitPkts" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.4'; > "snL4RealServerStatisticCurConnections" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.5'; > "snL4RealServerStatisticTotalConnections" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.6'; > "snL4RealServerStatisticFailTime" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.12'; > "snL4RealServerStatisticPeakConnections" = > '.1.3.6.1.4.1.1991.1.1.4.23.1.1.13'; > > "snL4RealServerPortStatisticState" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.5'; > "snL4RealServerPortStatusFailTime" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.6'; > "snL4RealServerPortStatusCurrentConnection" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.7'; > "snL4RealServerPortStatusTotalConnection" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.8'; > "snL4RealServerPortStatusPeakConnection" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.13'; > "snL4RealServerPortStatusRxPkts" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.9'; > "snL4RealServerPortStatusTxPkts" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.10'; > "snL4RealServerPortStatusRxBytes" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.11'; > "snL4RealServerPortStatusTxBytes" = > '.1.3.6.1.4.1.1991.1.1.4.24.1.1.12'; > > "snL4VirtualServerStatisticReceivePkts" = > '.1.3.6.1.4.1.1991.1.1.4.25.1.1.3'; > "snL4VirtualServerStatisticTransmitPkts" = > '.1.3.6.1.4.1.1991.1.1.4.25.1.1.4'; > "snL4VirtualServerStatisticTotalConnections" = > '.1.3.6.1.4.1.1991.1.1.4.25.1.1.5'; > > "snL4VirtualServerPortStatisticCurrentConnection" = > '.1.3.6.1.4.1.1991.1.1.4.26.1.1.4'; > "snL4VirtualServerPortStatisticTotalConnection" = > '.1.3.6.1.4.1.1991.1.1.4.26.1.1.5'; > "snL4VirtualServerPortStatisticPeakConnection" = > '.1.3.6.1.4.1.1991.1.1.4.26.1.1.6'; > > Hope this helps, > > Ivan Batanov > Earthlink, Inc (AS4355) > Manager Network Engineering > Phone (626) 296 5444 > Email: [EMAIL PROTECTED] > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of John > Willingham > Sent: Thursday, December 02, 2004 9:52 AM > To: [email protected] > Subject: [f-nsp] ServerIron SNMP Values > > Greetings, > > Is it possible to collect SNMP data on individual real/virtual > servers via SNMP on a ServerIron XL. I have done some digging but > none of the values that I have pulled up seem to be worthwhile. I am > just wondering if someone has experience with SNMP values with regards > to the ServerIron. > > Thanks and Have a Great Day, > > > John S. Willingham _______________________________________________ > > > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > >
