Aren't you trying to use Cisco's proprietary EtherChannel together with the Foundry proprietary equivalent ? If so, what you should do instead is used 802.3ad LACP equivalent.
... or I'm wrong. Cheers, Greg Le 11 juil. 06 ? 15:30, Hiromasa Sekiguchi a ?crit : > Hi all, > > I try chennel connection between Cisco and Foundry. > > The host is the following. > Cisco : cat3750 > Foundry : FWS4802-PREM > > +---------+ gi2/0/1 e49 +--------------+ > | cat3750 |=====================| FWS4802-PREM | > +---------+ gi2/0/2 e50 +--------------+ > > ### cat3750 ### > interface gigabitethernet 2/0/1 > switchport access vlan *** > switchport mode access > channel-group 1 mode active > > interface gigabitethernet 2/0/2 > switchport access vlan *** > switchport mode access > channel-group 1 mode active > ### > > ### FWS4802-PREM ### > interface ethernet 49 > link-aggregate configure key 20000 > link-aggregate active > > interface ethernet 50 > link-aggregate configure key 20000 > link-aggregate active > ### > > When gi2/0/1(or e49) was down, gi2/0/2 was flapped. > It occur about 90 sec later. > > Are there any solution? > > Please help!!! > > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp Gr?goire VILLAIN Ing?nieur R?seaux T?l?com Groupe RTL +33 1 40 70 40 86 gregoire.villain at rtl.fr
