On Thursday, 13 July 2006 at 19:25:14 +0900, Hiromasa Sekiguchi wrote: > Hi all, > > Thank you for your help. > > I try the following tests. > But all tests is fail... > > 1. add "channel-protocol lacp" command > > -> fail... > > 2. The LACP mode changed active/passive Cisco and Foundry. > > - Cisco is active, Foundry is active > > -> fail... > > - Cisco is active, Foundry is passive > > -> fail... > > - Cisco is passive, Foundry is active > > -> fail... > > I have no more ideas... > > Are there any ideas???
Why don't just use EtherChannel with out LACP or any aggregation protocol? Here is my configuration: CAT4506: interface GigabitEthernet2/3 description Goes to 2/7 of ServerIron 400 switchport access vlan 55 switchport mode access logging event link-status load-interval 30 speed 1000 no qos channel-group 1 mode on ! interface GigabitEthernet2/4 description Goes to 2/8 of ServerIron 400 switchport access vlan 55 switchport mode access logging event link-status load-interval 30 speed 1000 no qos channel-group 1 mode on SI400: trunk switch ethe 2/7 to 2/8 port-name "trunk to cs4506-sw11-NY 2/3-2/4 " ethernet 2/7 It works cool for me =) > > Regards, > Hiromasa > > > Hiromasa Sekiguchi wrote: > > Hi all, > > > > I try chennel connection between Cisco and Foundry. > > > > The host is the following. > > Cisco : cat3750 > > Foundry : FWS4802-PREM > > > > +---------+ gi2/0/1 e49 +--------------+ > > | cat3750 |=====================| FWS4802-PREM | > > +---------+ gi2/0/2 e50 +--------------+ > > > > ### cat3750 ### > > interface gigabitethernet 2/0/1 > > switchport access vlan *** > > switchport mode access > > channel-group 1 mode active > > > > interface gigabitethernet 2/0/2 > > switchport access vlan *** > > switchport mode access > > channel-group 1 mode active > > ### > > > > ### FWS4802-PREM ### > > interface ethernet 49 > > link-aggregate configure key 20000 > > link-aggregate active > > > > interface ethernet 50 > > link-aggregate configure key 20000 > > link-aggregate active > > ### > > > > When gi2/0/1(or e49) was down, gi2/0/2 was flapped. > > It occur about 90 sec later. > > > > Are there any solution? > > > > Please help!!! > > > > _______________________________________________ > > foundry-nsp mailing list > > foundry-nsp at puck.nether.net > > http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ > foundry-nsp mailing list > foundry-nsp at puck.nether.net > http://puck.nether.net/mailman/listinfo/foundry-nsp -- ========================================================================= = Best regards, Nikolay Pavlov. <<<------------------------------------ = =========================================================================
