With full Layer 3 you can get full RIP v1 and v2 advertisement and route learning, and full OSPF.
In base layer 3 with RIP support you can advertise direct connected subnets and learn the default route only. Best Regards, -------------------------------------------- Mohamed Tawfik Engineering Manager Salec Egypt Saudi Logistics and Electronics Company, 52, Gameat el Dewal el Arabeya St. 21 st floor, Suite 152 Mohandessien, Giza 12311, Egypt Tel : +202 3749-3518 Fax : +202 3749-3517 Mobile: +2010 6070 999 E-mail: [EMAIL PROTECTED] URL : http://www.salec.com -------------------------------------------- D I S C L A I M E R This electronic mail communication and any attachments are confidential and intended only for the individual, individuals or entity named above, or others specifically authorized to receive it. If you are not the intended recipient, please do not read, copy, use or disclose the contents of this communication to any individual or entity. Kindly notify the sender that you have received this communication in error by immediately replying via electronic mail. Further, please delete this electronic mail communication and any copies thereof without delay. Information contained herein may be subject to legal professional or other privileges and may further be protected by work product immunity or other legal rules. Thank you. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Lazuardi Nasution Sent: Saturday, September 06, 2008 12:26 PM To: [email protected] Subject: [f-nsp] FastIron RIP and OSPF Hi, I found this on the FastIron Configuration Guide. "Layer 2 with Base Layer 3 images provide static RIP support. The device does not learn RIP routes from other Layer 3 devices. However, the device does advertise directly connected routes and can be configured to dynamically learn default routes. Foundry Networks recommends that you deploy these devices only at the edge of your network, since incoming traffic can learn directly-connected routes advertised by the Foundry device, but outgoing traffic to other devices must use statically configured or default routes." Is it still happen on RIP and OSPF of FastIron with Full Layer 3 images ? Best regards, _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
