Very complete explanation. But, is it happen too for chassis based FastIron like SuperX ?
On Sun, Sep 7, 2008 at 3:27 PM, Mohamed Tawfik <[EMAIL PROTECTED]> wrote: > With full Layer 3 you can get full RIP v1 and v2 advertisement and route > learning, and full OSPF. > > In base layer 3 with RIP support you can advertise direct connected > subnets and learn the default route only. > > > > Best Regards, > -------------------------------------------- > Mohamed Tawfik > Engineering Manager > Salec Egypt > Saudi Logistics and Electronics Company, > 52, Gameat el Dewal el Arabeya St. 21 st floor, Suite 152 > Mohandessien, Giza 12311, Egypt > Tel : +202 3749-3518 > Fax : +202 3749-3517 > Mobile: +2010 6070 999 > E-mail: [EMAIL PROTECTED] > URL : http://www.salec.com > > -------------------------------------------- > > > > > > D I S C L A I M E R This electronic mail communication and any > attachments are confidential and intended only for the individual, > individuals or entity named above, or others specifically authorized to > receive it. If you are not the intended recipient, please do not read, > copy, use or disclose the contents of this communication to any > individual or entity. Kindly notify the sender that you have received > this communication in error by immediately replying via electronic mail. > Further, please delete this electronic mail communication and any copies > thereof without delay. Information contained herein may be subject to > legal professional or other privileges and may further be protected by > work product immunity or other legal rules. Thank you. > > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Lazuardi > Nasution > Sent: Saturday, September 06, 2008 12:26 PM > To: [email protected] > Subject: [f-nsp] FastIron RIP and OSPF > > Hi, > > I found this on the FastIron Configuration Guide. > > "Layer 2 with Base Layer 3 images provide static RIP support. The > device does not learn RIP routes from other Layer 3 devices. However, > the device does advertise directly connected routes and can be > configured to dynamically learn default routes. Foundry Networks > recommends that you deploy these devices only at the edge of your > network, since incoming traffic can learn directly-connected routes > advertised by the Foundry device, but outgoing traffic to other > devices must use statically configured or default routes." > > Is it still happen on RIP and OSPF of FastIron with Full Layer 3 images > ? > > Best regards, > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
