With full Layer 3 you can get full RIP v1 and v2 advertisement and
route
learning, and full OSPF.
In base layer 3 with RIP support you can advertise direct connected
subnets and learn the default route only.
Best Regards,
--------------------------------------------
Mohamed Tawfik
Engineering Manager
Salec Egypt
Saudi Logistics and Electronics Company,
52, Gameat el Dewal el Arabeya St. 21 st floor, Suite 152
Mohandessien, Giza 12311, Egypt
Tel : +202 3749-3518
Fax : +202 3749-3517
Mobile: +2010 6070 999
E-mail: [EMAIL PROTECTED]
URL : http://www.salec.com
--------------------------------------------
D I S C L A I M E R This electronic mail communication and any
attachments are confidential and intended only for the individual,
individuals or entity named above, or others specifically
authorized to
receive it. If you are not the intended recipient, please do not
read,
copy, use or disclose the contents of this communication to any
individual or entity. Kindly notify the sender that you have received
this communication in error by immediately replying via electronic
mail.
Further, please delete this electronic mail communication and any
copies
thereof without delay. Information contained herein may be subject to
legal professional or other privileges and may further be protected
by
work product immunity or other legal rules. Thank you.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Lazuardi
Nasution
Sent: Saturday, September 06, 2008 12:26 PM
To: [email protected]
Subject: [f-nsp] FastIron RIP and OSPF
Hi,
I found this on the FastIron Configuration Guide.
"Layer 2 with Base Layer 3 images provide static RIP support. The
device does not learn RIP routes from other Layer 3 devices. However,
the device does advertise directly connected routes and can be
configured to dynamically learn default routes. Foundry Networks
recommends that you deploy these devices only at the edge of your
network, since incoming traffic can learn directly-connected routes
advertised by the Foundry device, but outgoing traffic to other
devices must use statically configured or default routes."
Is it still happen on RIP and OSPF of FastIron with Full Layer 3
images
?
Best regards,
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
