On Tue, 27 Jan 2009 10:28:36 +0100 Allan Eising <[email protected]> wrote:
> Hi there, > > We're currently considering if the Foundry MLX/XMR series will fit as our > core routers. > I've been searching through the foundry site, and there are two core > requirements that I'm uncertain if the XMR or MLX can handle: > > - VLANs overlapping between interfaces, eg. two routed vlan subinterfaces > both encapsulated with vlan 50. I don't understand why You need VLAN overlapping for this case. feature name is ip-follow but on MLX-XMR this is not support, you need use PVLAN to make this if use old IOS, in new IOS PVLAN not supported!!! Why You need VLAN overlapping btw ? my be find different way ... > - Per sub-interface shaping. rate-limit with policy-map work very good per VLAN for me. rate-limit with policy-map + ACL work too / my use per vrf or global / > > For the sake of clarity, I've uploaded a conceptual diagram, available here: > http://img104.imageshack.us/img104/5186/conceptsl6.png > > Is there anyone on this list who are able to assist? > > Regards, > > Allan Eising > -- <[email protected]> _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
