* [email protected] (Mike Lott) [Wed 16 Sep 2009, 00:56 CEST]:
In order to have keep-alives purely over that trunk as opposed to
going through the CORE, would I enter the following on _both_
Serverirons?
(config)#link-keepalive ethernet 2/5 ethernet 2/6
The documentation of the code base I am running is a little sparse and
all I can find on this is in the document "Foundry Switch and Router
Installation and Basic Configuration Guide" where it talks about
configuring UDLD. Apologies, but I am a little confused.
"link-keepalive" is how one configures UDLD on an interface. It has to
be enabled on both sides to work, and it's Foundry proprietary.
This is distinct from keepalives sent between two load-balancers.
Hopefully another poster can point you at that, if it's possible at all.
-- Niels.
--
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
