Hey Niels Thanks for that. Hopefully someone will shed some light on this :)
Mike 2009/9/16 Niels Bakker <[email protected]>: > * [email protected] (Mike Lott) [Wed 16 Sep 2009, 00:56 CEST]: >> >> In order to have keep-alives purely over that trunk as opposed to going >> through the CORE, would I enter the following on _both_ Serverirons? >> >> (config)#link-keepalive ethernet 2/5 ethernet 2/6 >> >> The documentation of the code base I am running is a little sparse and all >> I can find on this is in the document "Foundry Switch and Router >> Installation and Basic Configuration Guide" where it talks about configuring >> UDLD. Apologies, but I am a little confused. > > "link-keepalive" is how one configures UDLD on an interface. It has to be > enabled on both sides to work, and it's Foundry proprietary. > > This is distinct from keepalives sent between two load-balancers. Hopefully > another poster can point you at that, if it's possible at all. > > > -- Niels. > > -- > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
