Hello Clement, which exact software tree are you referring to?
I was trying to enable v6 on 8001u (08.0.01uT53 / B2R08001u.bin) but didn't have success. Is the B2R-image the correct version set? My modules are jetcore (J-BxGMR4). Can't find the appropriate manual :-( The v6 manual from April (IPv6_April2009_Config_Guide.pdf) just says IronWare Software 07.7.02 and higher. Thanks, Gunther [apologies for dupes - had to send the message again due to spam protection] > -----Ursprüngliche Nachricht----- > Von: [email protected] [mailto:foundry-nsp- > [email protected]] Im Auftrag von Clement Cavadore > Gesendet: Donnerstag, 8. Oktober 2009 00:55 > An: Joseph Hardeman > Cc: [email protected] > Betreff: Re: [f-nsp] IPv6 on BigIron? > > Hi, > > > Le mercredi 07 octobre 2009 à 18:19 -0400, Joseph Hardeman a écrit : > > Yes, the J-BxGMR4 will do IPv6, but you need to have a software > > version greater than 08.0.x. > > > More precisely: You need Jetcore module *and* software equals to 08.x. > 9.x or 7.x do not have any IPv6 features. > > However, Jetcore manager runs a fully software-based IPv6 routing. > > Regards, > > Clément > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
