You need the B2P08001x software, the B2R doesn't have IPv6 support
Gunther Stammwitz wrote:
Hello Clement,
which exact software tree are you referring to?
I was trying to enable v6 on 8001u (08.0.01uT53 / B2R08001u.bin) but didn't
have success.
Is the B2R-image the correct version set? My modules are jetcore (J-BxGMR4).
Can't find the appropriate manual :-(
The v6 manual from April (IPv6_April2009_Config_Guide.pdf) just says
IronWare
Software 07.7.02 and higher.
Thanks,
Gunther
[apologies for dupes - had to send the message again due to spam protection]
-----Ursprüngliche Nachricht-----
Von: [email protected] [mailto:foundry-nsp-
[email protected]] Im Auftrag von Clement Cavadore
Gesendet: Donnerstag, 8. Oktober 2009 00:55
An: Joseph Hardeman
Cc: [email protected]
Betreff: Re: [f-nsp] IPv6 on BigIron?
Hi,
Le mercredi 07 octobre 2009 à 18:19 -0400, Joseph Hardeman a écrit :
Yes, the J-BxGMR4 will do IPv6, but you need to have a software
version greater than 08.0.x.
More precisely: You need Jetcore module *and* software equals to 08.x.
9.x or 7.x do not have any IPv6 features.
However, Jetcore manager runs a fully software-based IPv6 routing.
Regards,
Clément
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
--
Met vriendelijke groet,
Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
[email protected]
telefoon:+31 (035) 6285455 Postbus 48
fax: +31 (035) 6838242 3755 ZG Eemnes
http://www.easyhosting.nl
http://www.easycolocate.nl
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
