Do You have ebgp-multihop or next-hp-self ? Do You have set "password" on neighbor ?
On Monday 15 February 2010 17:16:25 My Name wrote: > Update #2: > > Our current issue is a BGP flap betweem the MLX-8 and a Juniper EX series, > the Juniper box is complaining with the following: > > Last Error: Cease > > Juniper docs indicate this could be a version mismatch, there is no > explicit version > command that I see in Foundry, has anyone else seen this problem? Does > anyone know > of any other reason the Juniper box would terminate the session based on > that error message? > > On Mon, Feb 15, 2010 at 9:55 AM, Debbie Fligor <[email protected]> wrote: > > I'll second this caution. we just tried to take one of our backbone > > MLX-8s from 4.0.1a to 4.1.00 last week. we spent the week fighting weird > > routing issues where things would drop off our campus net, and backing it > > out was a fiasco (complicated due to furlough policies where the two > > people working with it the most last week couldn't be contacted during > > off hours after midnight Sunday morning when the back out happened). > > > > we've been pretty happy on 4.0.1a except for multicast problems (PIM and > > mBGP) for quite some time, both on our campus backbone and the regional > > network we run between our campus. > > > > I believe there might be a new code release expected later this month but > > I don't have details. > > > > > > ----- > > -debbie > > Debbie Fligor, n9dn Network Engineer, CITES, Univ. of Il > > email: [email protected] <http://www.uiuc.edu/ph/www/fligor> > > "My turn." -River Tam > > > > On Feb 15, 2010, at 7:34, Ronald Esveld wrote: > > > Be aware with 4.1.00 flat, Brocade does trics in memory for the > > > > accommodation of 2000 VRRP(E) instances. > > > > > Not all system-max variables can be ran at the same time in 4.1.00. > > > > > > Version 4.1.00 works fine as far as BGP concerned J > > > > > > Ronald > > > > > > Van: [email protected] [mailto: > > > > [email protected]] Namens Frankie John-Lewis > > > > > Verzonden: maandag 15 februari 2010 14:32 > > > Aan: [email protected]; [email protected] > > > Onderwerp: Re: [f-nsp] OS > > > > > > We are currently running 3.9e on the XMRs and are experiencing no > > > issues > > > > with BGP > > > > > We ere thinking of upgrading to 4.1 in the near future > > > > > > I would recommend that you at least upgrade to 3.9 as a lot of the > > > issues > > > > you may be experiencing are fixed in 3.9 and upwards > > > > > From: [email protected] < > > > > [email protected]> > > > > > To: foundry-nsp <[email protected]> > > > Sent: Mon Feb 15 13:10:34 2010 > > > Subject: [f-nsp] OS > > > > > > Can anyone tell me the current software version for the MLX-8? > > > > > > We are currently running 3.5 and we are having some issues with > > > BGP peers bouncing, we have changed the BGP timers for fast failovers. > > > > > > > > > Any help would be appreciated? > > > > > > > > > What versions are you running? any problems with BGP or MRP? > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
