Right now we are going through looking at L1 and L2 to ensure there are no issues. According to the logs it looks like the Juniper box(did not have access initially) is losing link so we are troubleshooting interface settings and L1 possibilities.
thank you for teh follow up, I will let everyone know the root cause Joe On Tue, Feb 16, 2010 at 3:59 AM, kgb <[email protected]> wrote: > Do You fix problem ? > > > > On Monday 15 February 2010 18:20:30 My Name wrote: > > ---------- Forwarded message ---------- > > From: My Name <[email protected]> > > Date: Mon, Feb 15, 2010 at 11:20 AM > > Subject: Re: [f-nsp] OS > > To: kgb <[email protected]> > > > > > > I do not have any of the features you mentioned turned on, what we do > have > > is a packet shaper in between operating at L2, the odd thing is that all > is > > well for a couple of hours and then it flaps, 10+ times since last night. > > > > On Mon, Feb 15, 2010 at 10:59 AM, kgb <[email protected]> wrote: > > > Do You have ebgp-multihop or next-hp-self ? > > > Do You have set "password" on neighbor ? > > > > > > On Monday 15 February 2010 17:16:25 My Name wrote: > > > > Update #2: > > > > > > > > Our current issue is a BGP flap betweem the MLX-8 and a Juniper EX > > > > > > series, > > > > > > > the Juniper box is complaining with the following: > > > > > > > > Last Error: Cease > > > > > > > > Juniper docs indicate this could be a version mismatch, there is no > > > > explicit version > > > > command that I see in Foundry, has anyone else seen this problem? > Does > > > > anyone know > > > > of any other reason the Juniper box would terminate the session based > > > > on that error message? > > > > > > > > On Mon, Feb 15, 2010 at 9:55 AM, Debbie Fligor <[email protected]> > > > > > > wrote: > > > > > I'll second this caution. we just tried to take one of our backbone > > > > > MLX-8s from 4.0.1a to 4.1.00 last week. we spent the week fighting > > > > > > weird > > > > > > > > routing issues where things would drop off our campus net, and > > > > > backing > > > > > > it > > > > > > > > out was a fiasco (complicated due to furlough policies where the > two > > > > > people working with it the most last week couldn't be contacted > > > > > during off hours after midnight Sunday morning when the back out > > > > > happened). > > > > > > > > > > we've been pretty happy on 4.0.1a except for multicast problems > (PIM > > > > > > and > > > > > > > > mBGP) for quite some time, both on our campus backbone and the > > > > > regional network we run between our campus. > > > > > > > > > > I believe there might be a new code release expected later this > month > > > > > > but > > > > > > > > I don't have details. > > > > > > > > > > > > > > > ----- > > > > > -debbie > > > > > Debbie Fligor, n9dn Network Engineer, CITES, Univ. of Il > > > > > email: [email protected] > > > > > <http://www.uiuc.edu/ph/www/fligor > > > > > > > > > > "My turn." -River Tam > > > > > > > > > > On Feb 15, 2010, at 7:34, Ronald Esveld wrote: > > > > > > Be aware with 4.1.00 flat, Brocade does trics in memory for the > > > > > > > > > > accommodation of 2000 VRRP(E) instances. > > > > > > > > > > > Not all system-max variables can be ran at the same time in > 4.1.00. > > > > > > > > > > > > Version 4.1.00 works fine as far as BGP concerned J > > > > > > > > > > > > Ronald > > > > > > > > > > > > Van: [email protected] [mailto: > > > > > > > > > > [email protected]] Namens Frankie John-Lewis > > > > > > > > > > > Verzonden: maandag 15 februari 2010 14:32 > > > > > > Aan: [email protected]; [email protected] > > > > > > Onderwerp: Re: [f-nsp] OS > > > > > > > > > > > > We are currently running 3.9e on the XMRs and are experiencing no > > > > > > issues > > > > > > > > > > with BGP > > > > > > > > > > > We ere thinking of upgrading to 4.1 in the near future > > > > > > > > > > > > I would recommend that you at least upgrade to 3.9 as a lot of > the > > > > > > issues > > > > > > > > > > you may be experiencing are fixed in 3.9 and upwards > > > > > > > > > > > From: [email protected] < > > > > > > > > > > [email protected]> > > > > > > > > > > > To: foundry-nsp <[email protected]> > > > > > > Sent: Mon Feb 15 13:10:34 2010 > > > > > > Subject: [f-nsp] OS > > > > > > > > > > > > Can anyone tell me the current software version for the MLX-8? > > > > > > > > > > > > We are currently running 3.5 and we are having some issues with > > > > > > BGP peers bouncing, we have changed the BGP timers for fast > > > > > > failovers. > > > > > > > > > Any help would be appreciated? > > > > > > > > > > > > > > > > > > What versions are you running? any problems with BGP or MRP? > > > > > > _______________________________________________ > > > foundry-nsp mailing list > > > [email protected] > > > http://puck.nether.net/mailman/listinfo/foundry-nsp > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
