I think you're confusing static (non-LACP) and active (LACP) trunks. If you use active you don't use trunk statements. You should just be able to remove the link-aggregate statements from the Ethernet interface.
Frank -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Robert Hass Sent: Monday, June 04, 2012 2:56 PM To: [email protected] Subject: [f-nsp] Remove one interface from LACP group Hi I have problem removing one interface from LACP trunk group. Here is my configuration: interface ethernet 1/1/5 port-name link01 no flow-control link-aggregate configure key 30000 link-aggregate active ! interface ethernet 1/1/6 port-name link02 link-aggregate configure key 30000 link-aggregate active ! interface ethernet 1/1/7 port-name link03 link-aggregate configure key 30000 link-aggregate active telnet@lab#show link-ag Long timeout: 90, default: 90 Short timeout: 3, default: 3 Port [Sys P] [Port P] [ Key ] [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope] 1/1/5 1 1 30000 Yes L Agg Syn Col Dis No No Ope 1/1/6 1 1 30000 Yes L Agg Syn Col Dis No No Ope 1/1/7 1 1 30000 Yes L Agg Syn Col Dis No No Ope I would like to remove port 1/1/6 from link-aggregation, but how I can do this ? telnet@lab(config)#no trunk ethernet 1/1/6 Error - Please provide all (3) Lacp Trunk Ports This not work. telnet@lab(config)#trunk ethernet 1/1/5 to 1/1/7 telnet@lab(config-trunk-1/1/5-1/1/7)#disable ethernet 1/1/6 telnet@lab(config-trunk-1/1/5-1/1/7)#no trunk e 1/1/6 Error - Please provide all (3) Lacp Trunk Ports Rob _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
