Try exit after you disable the port within the trunk. You are still in the trunk configuration, different context. I don't have one to check this on right now.
Mike On Mon, Jun 4, 2012 at 3:09 PM, Robert Hass <[email protected]> wrote: > On Mon, Jun 4, 2012 at 11:53 PM, Frank Bulk <[email protected]> wrote: > > I haven't seemed to need to do that on the ICX6610 platform -- perhaps > > that's the difference? > > It's ICX 6450 not 6610 :-) > IronWare 7.4 > > But it's not ICX related. I have same issue on old FastIron LS624 running > 7.2.2d > > BR-telnet@fls(config)#trunk ethernet 0/1/3 to 0/1/6 > BR-telnet@fls(config-trunk-0/1/3-0/1/6)#config-trunk-ind > BR-telnet@fls(config-trunk-0/1/3-0/1/6)#disable ethernet 0/1/6 > BR-telnet@fls(config-trunk-0/1/3-0/1/6)#int ethernet 0/1/6 > Error - cannot configure secondary ports of a trunk > > Rob > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
