I think you just set up a static trunk over the lacp trunk with this:
BR-telnet@fls(config)#trunk ethernet 0/1/3 to 0/1/6
Check a 'show trunk' and a 'show link-ag' output, just to be sure...
Tamas
On 06/05/2012 12:09 AM, Robert Hass wrote:
On Mon, Jun 4, 2012 at 11:53 PM, Frank Bulk<[email protected]> wrote:
I haven't seemed to need to do that on the ICX6610 platform -- perhaps
that's the difference?
It's ICX 6450 not 6610 :-)
IronWare 7.4
But it's not ICX related. I have same issue on old FastIron LS624 running 7.2.2d
BR-telnet@fls(config)#trunk ethernet 0/1/3 to 0/1/6
BR-telnet@fls(config-trunk-0/1/3-0/1/6)#config-trunk-ind
BR-telnet@fls(config-trunk-0/1/3-0/1/6)#disable ethernet 0/1/6
BR-telnet@fls(config-trunk-0/1/3-0/1/6)#int ethernet 0/1/6
Error - cannot configure secondary ports of a trunk
Rob
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
