On 8/20/2012 1:17 PM, Frederic Jaeckel wrote: > Hej, > > I got these all new modules in completely new MLX4-e chassis and don't > know what the issue is, but the BR-MLX-1GFx24-X modules are always > recognized as invalid and put into interactive mode. I tried upgrading > the devices from IronWare 5.2c to IronWare 5.3b, but this didn't help. > The LP FPGA images, monitor and boot images are all up to date and the > linecard is not being recognized in both 5.2c and 5.3b. Anyone has an > idea why that is? I have 1GE Fiber SFPs in these linecards. > > #sho mod > Module Status Ports Starting MAC > M1 (left): NI-MLX-MR Management Module Active > M2 (right): NI-MLX-MR Management Module Standby (Ready State) > F1: NI-X-HSF Switch Fabric Module Active > F2: NI-X-HSF Switch Fabric Module Active > F3: NI-X-HSF Switch Fabric Module Active > S1: BR-MLX-1GFx24-X 24-port 1GbE SFP Module CARD_STATE_INTERACTIVE 0 > 0024.38a5.4c00 > (S1: Configured as invalid module) > S2: NI-MLX-10Gx8-D 8-port 10GbE (D) Module CARD_STATE_UP 8 > 0024.38a5.4c30 > S3: NI-MLX-10Gx8-D 8-port 10GbE (D) Module CARD_STATE_UP 8 > 0024.38a5.4c60 > S4: > > # sho log > Aug 20 16:33:53:N:Module 1 is reset by mgmt (reason: boot to interactive mode) > Aug 20 16:33:36:N:System: Module was inserted to slot 1 > Aug 20 16:33:25:N:System: Module was removed from slot 1 > > Cheers, > Frederic Jaeckel
Hi Frederic, Configure "snmp-server max-ifindex-per-module 40" to change the default from 20 to 40. This will allow the system to recognize the card with 24 interfaces. /Eric _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
