On 11/13/12 22:40 +0000, [email protected] wrote:
Hello,
It's extremely obvious that it's possible to initiate a telnet session
from a NetIron XMR, but I didn't see a way to do the same for SSH. Is
there any SSH client functionality at all on this platform? I'm leaning
towards no, but will happily stand corrected.
I'm currently on Ironware 5.1 if it makes any difference.
Support has been added, but I don't know in which version.
On one of our XMR's running 5.1:
XMR-PTC#ssh ?
no-show-host-keys Disable showing the SSH HOST Keys in the running-config
show-host-keys Enable showing the SSH HOST Keys in the running-config
And on an XMR running 5.4:
XMR-SOUTH#ssh ?
ASCII string Host name
A.B.C.D Host IP address
ipv6 SSH to IPv6 Node
no-show-client-keys Disable showing the SSH Client Keys in the
running-config
no-show-host-keys Disable showing the SSH HOST Keys in the running-config
show-client-keys Enable showing the SSH client Keys in the running-config
show-host-keys Enable showing the SSH HOST Keys in the running-config
vrf Virtual Routing and Forwarding instance
--
Dan White
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
