Ah, nice! One more reason to upgrade. :) Thanks!
-Vinny -----Original Message----- From: Dan White [mailto:[email protected]] Sent: Tuesday, November 13, 2012 5:58 PM To: Abello, Vinny Cc: [email protected] Subject: Re: SSH from NetIron XMR? On 11/13/12 22:40 +0000, [email protected] wrote: >Hello, > >It's extremely obvious that it's possible to initiate a telnet session >from a NetIron XMR, but I didn't see a way to do the same for SSH. Is >there any SSH client functionality at all on this platform? I'm leaning >towards no, but will happily stand corrected. > >I'm currently on Ironware 5.1 if it makes any difference. Support has been added, but I don't know in which version. On one of our XMR's running 5.1: XMR-PTC#ssh ? no-show-host-keys Disable showing the SSH HOST Keys in the running-config show-host-keys Enable showing the SSH HOST Keys in the running-config And on an XMR running 5.4: XMR-SOUTH#ssh ? ASCII string Host name A.B.C.D Host IP address ipv6 SSH to IPv6 Node no-show-client-keys Disable showing the SSH Client Keys in the running-config no-show-host-keys Disable showing the SSH HOST Keys in the running-config show-client-keys Enable showing the SSH client Keys in the running-config show-host-keys Enable showing the SSH HOST Keys in the running-config vrf Virtual Routing and Forwarding instance -- Dan White _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
