I just happened to be reading the 5.3 release notes and I just saw that they state:
Beginning with R05.3.00, all types of POS modules are not supported. -Vinny From: [email protected] [mailto:[email protected]] On Behalf Of Mike Tindle Sent: Friday, March 29, 2013 3:53 PM To: Dave Peters - Terabit Systems; [email protected] Cc: Niels Bakker Subject: Re: [f-nsp] NI-X-OC192x2 Card Unsupported? * [email protected]<mailto:[email protected]> (Dave Peters - Terabit Systems) [Fri 29 Mar 2013, 18:34 CET]: Couldn't find any docs on this., but I've got an NI-X-OC192x2 card that keeps giving an unsupported error: NetIron XMR-16000 Router>Module down in slot 1, reason CARD_DOWN_REASON_UNSUPPORTED_CARD. Error Code (0) I'm running an XMR with 5400b. Anyone seen this before? Solutions? It's "EOL per 1/4/2013" which I assume to be 4 January. Removal of support may have been mentioned in software release notes, but if so I've read past it. Tried downgrading to a 5.2-based release? 5.3 is supposed to be the last supported version for POS cards from what I hear. Regards, Mike *----------- H U R R I C A N E - E L E C T R I C ---------->> | Mike Tindle | Senior Network Engineer | [email protected]<mailto:[email protected]> | ASN 6939 | http://www.he.net | 510-580-4126 *--------------------------------------------------->>
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
