Took me a while to get used to this do. The 'secondary' parameter has a different meaning in Foundry then it does in Cisco. On a Cisco device, 'secondary' means that you want to put an additional IP on an interface. On a Foundry device, this is used to have more than 1 IP from the SAME subnet on the interface. If you want to add an IP from a different subnet on the Foundry device, you just add it without the secondary command. So, in your example, the command would be "ip address XXX.XXX.XXX.XXX 255.255.255.0".
--Jake From: foundry-nsp [mailto:[email protected]] On Behalf Of Youssef Bengelloun-Zahr Sent: Friday, July 05, 2013 11:55 AM To: [email protected] Subject: [f-nsp] Secondary IP Address weirdness Hello community, This has got to be an hallucination : telnet@er01-par01(config-vif-4)#ip address XXX.XXX.XXX.XXX 255.255.255.0 secondary IP/Port: Errno(12) Assign primary ip address on specified subnet first Really !?! Any other way to configure secondary address but on a different subnet ? Running MLXe boxes with 540b Best regards. -- Youssef BENGELLOUN-ZAHR
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
