No routing at all The meltdown is almost certainly the result of 6 Fastirons, 2 turboIrons running a combination of IEEE, 802.1w and No spanning tree at all. Ive diagrammed this now for each vlan, and I have found some serious deisgn issues.
MGT wanted me to figure out what happened, All I can think about is how to fix this - i.e 801.w everywhere, on all vlans - It seems that this runs as a per-vlan spanning tree flavor? NickC From: Nick Hilliard [mailto:[email protected]] Sent: Wednesday, May 18, 2016 10:28 AM To: Eldon Koyle Cc: Nick Cutting; foundry-nsp Subject: Re: [f-nsp] Spanning tree on brocade Eldon Koyle wrote: > That is _really_ old code on the turboiron. It may be the version they > shipped with, which was extremely buggy. You are correct that it is > routing code (TIR is routing, TIS is switching). Are you doing any > routing on that device? old and buggy, but stp on 4.02.00c was fine. If there was an STP meltdown, it's more likely to have been the result of a network misconfig. 7.3.00f was the next usable version of the tix code after 4.02.00c. Upgrading would be a really good idea, not least due to the unicast flooding problem in all versions of the turboiron code before 7.3 (DEFECT000362191). Nick ________________________________
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
